Technology of Fluoropolymers: A Concise Handbook [3 ed.] 9781032013602

Table of contents :
Cover
Half Title
Technology of Fluoropolymers: A Concise Handbook
Copyright
Contents
Abbreviations
Preface to the First Edition
Preface to the Second Edition
Preface to the Third Edition
About the Authors
Part I. Overview of Fluoropolymers
1. Introduction
References
2. Societal Benefits of Fluoropolymers
2.1 Basic Fluoropolymer Properties
2.2 Examples of Fluoropolymer Properties
2.3 Automotive Applications
2.4 Aerospace Wire and Cable
2.5 Aircraft Fuel Hoses
2.6 Heart Rhythm Management: The Implantable Cardioverter Defibrillator
2.7 Pediatric Heart Repair
2.8 Thread Sealant
2.9 Chemical Processing Industry-lined Pipes, Fittings, and Vessels
2.10 Semiconductor Chip Fabrication
2.11 Biomedical Applications
2.12 PTFE Micropowders
2.13 Applications of Fluoroelastomers in Transportation
2.14 Properties of Thermoplastic Fluoropolymers
2.15 Delving Deeper into Properties
2.16 Forces Affecting the Fluoropolymer Industries
References
Part II. Thermoplastic Fluoropolymers
3. Synthesis and Properties of Monomers of Thermoplastic Fluoropolymers
3.1 Preparation of Tetrafluoroethylene
3.2 Properties of Tetrafluoroethylene
3.3 Preparation of Hexafluoropropylene
3.4 Properties of Hexafluoropropylene
3.5 Synthesis of Perfluoroalkylvinylethers
3.6 Properties of Perfluoroalkylvinylethers
3.7 Synthesis of Chlorotrifluoroethylene (CTFE)
3.8 Properties of Chlorotrifluoroethylene
3.9 Synthesis of Vinylidene Fluoride
3.10 Properties of Vinylidene Fluoride
3.11 Synthesis of Vinyl Fluoride
3.12 Properties of Vinyl Fluoride
References
4. Polymerization of Commercial Thermoplastic Fluoropolymers
4.1 Polymerization of Tetrafluoroethylene
4.1.1 Granular Resins
4.1.2 Fine Powder Resins
4.1.3 Aqueous Dispersions
4.1.4 Filled Compounds
4.1.5 Modified PTFE
4.2 Fluorinated Ethylene Propylene
4.2.1 Industrial Process for the Production of FEP
4.3 Perfluoroalko x y Resin
4.3.1 Industrial Process for the Production of Perfluoroalkoxy Resins
4.4 Polychlorotrifluoroethylene
4.4.1 Industrial Process for the Production of Polychlorotrifluoroethylene
4.5 Polyvinylidene Fluoride
4.5.1 Industrial Process for the Production of Polyvinylidene Fluoride
4.6 Polyvinyl Fluoride
4.6.1 Industrial Process for the Production of Polyvinyl Fluoride
4.7 Ethylene Chlorotrifluoroethylene Copolymer
4.7.1 Industrial Process for the Production of Ethylene Chlorotrifluoroethylene
4.8 Ethylene Tetrafluoroethylene Copolymer
4.8.1 Industrial Process for the Production of Ethylene Tetrafluoroethylene
4.9 Terpolymers of Tetrafluoroethylene, Hexafluoropropylene, and Vinylidene Fluoride (THV Fluoroplastic)
4.10 Terpolymers and Quarterpolymers of Hexafluoropropylene, Tetrafluoroethylene, and Ethylene
References
5. Properties of Commercial Thermoplastic Fluoropolymers
5.1 Properties as Related to the Structure of Fluoropolymers
5.1.1 Fluoroplastics
5.1.1.1 Mechanical Properties
5.1.1.2 Optical Properties
5.1.2 Fluoroelastomers
5.2 Properties of Individual Commercial Fluoroplastics
5.2.1 Polytetrafluoroethylene
5.2.1.1 Molecular Weight
5.2.1.2 Molecular Conformation
5.2.1.3 Crystallinity and Melting Behavior
5.2.1.4 Mechanical Properties
5.2.1.5 Surface Properties
5.2.1.6 Absorption and Permeation
5.2.1.7 Electrical Properties
5.2.2 Modified Polytetrafluoroethylene
5.2.3 Copolymers of Tetrafluoroethylene and Hexafluoropropylene (FEP)
5.2.3.1 Mechanical Properties
5.2.3.2 Electrical Properties
5.2.3.3 Chemical Properties
5.2.3.4 Optical Properties
5.2.3.5 Other Properties
5.2.4 Copolymers of Tetrafluoroethylene and Perfluoroalkyl Ethers (PFA and MFA)
5.2.4.1 Physical and Mechanical Properties
5.2.4.2 Electrical Properties
5.2.4.3 Optical Properties
5.2.4.4 Chemical Properties
5.2.5 Copolymers of Ethylene and Tetrafluoroethylene (ETFE)
5.2.5.1 Structure and Related Properties
5.2.5.2 Mechanical, Chemical, and Other Properties
5.2.6 Polyvinylidene Fluoride (PVDF)
5.2.6.1 Mechanical Properties
5.2.6.2 Electrical Properties
5.2.6.3 Chemical Properties
5.2.7 Polychlorotrifluoroethylene (PCTFE)
5.2.7.1 Thermal Properties
5.2.7.2 Mechanical, Chemical, and Other Properties
5.2.8 Copolymer of Ethylene and Chlorotrifluoroethylene (ECTFE)
5.2.8.1 Properties of ECTFE
5.2.9 Terpolymer of Tetrafluoroethylene, Hexafluoropropylene, and Vinylidene Fluoride (THV Fluoroplastic)
5.2.9.1 Properties
5.2.10 Terpolymer of Ethylene, Tetrafluoroethylene, and Hexafluoropropylene (EFEP)
5.2.11 Polyvinyl Fluoride (PVF)
5.2.11.1 Properties of the PVF Polymer
5.2.11.2 Polyvinyl Fluoride Films and Their Properties
5.2.11.2.1 Chemical Properties
5.2.11.2.2 Optical Properties
5.2.11.2.3 Weathering Performance
5.2.11.2.4 Electrical Properties
5.2.11.2.5 Thermal Stability
References
6. Processing of Polytetrafluoroethylene Resins
6.1 Processing of Granular Resins
6.1.1 Compression Molding
6.1.1.1 Preforming
6.1.1.2 Sintering
6.1.2 Other Molding Methods
6.1.3 Ram Extrusion
6.2 Processing of Fine Powders
6.2.1 Introduction
6.2.2 Fabrication Methods for Products from Fine Powders
6.2.2.1 Preparation of the Extrusion Mix
6.2.2.2 Preforming
6.2.2.3 Extrusion
6.2.3 Fabrication of Films, Tapes, and Sealing Cords
6.2.3.1 Manufacture of Unsintered Tape
6.2.4 Fabrication of Tubing and Hoses
6.2.4.1 Tube Extrusion
6.2.4.2 Drying and Sintering of Tubes
6.2.5 Fabrication of Thick-Walled Pipes and Liners
6.2.5.1 Liner Extrusion
6.2.5.2 Drying and Sintering the Liner
6.2.6 Fabrication of Wire and Cable Insulation
6.2.6.1 Wire Extruder System
6.2.6.2 Wire Extrusion Process
6.2.6.3 Drying and Sintering of Wire Insulation
6.2.7 Expanded PTFE
6.2.7.1 The Expansion Process
References
7. Fabrication of Melt-Processible Fluoropolymers
7.1 Melt-Processible Perfluoroplastics
7.1.1 Copolymers of Tetrafluoroethylene and Hexafluoropropylene: Fluorinated Ethylene Propylene
7.1.2 Copolymers of Tetrafluoroethylene and Perfluoroalkyl Ethers (PFA and MFA)
7.2 Processing of Other Melt-Processible Fluoroplastics
7.2.1 Copolymers of Ethylene and Tetrafluoroethylene (ETFE)
7.2.2 Polyvinylidene Fluoride (PVDF)
7.2.3 Polychlorotrifluoroethylene (PCTFE)
7.2.4 Copolymers of Ethylene and Chlorotrifluoroethylene (ECTFE)
7.2.5 Terpolymers of Tetrafluoroethylene, Hexafluoropropylene, and Vinylidene Fluoride (THV Fluoroplastics)
7.2.6 Terpolymer of Ethylene, Tetrafluoroethylene, and Hexafluoropropylene: (EFEP)
References
8. Applications of Commercial Thermoplastic Fluoropolymers
8.1 Applications of PTFE and Modified PTFE
8.2 Applications of FEP
8.3 Applications of PFA and MFA
8.4 Applications of ETFE
8.5 Applications of PVDF
8.6 Applications of PCTFE
8.7 Applications of ECTFE
8.8 Applications of THV Fluoroplastics
8.9 Applications of EFEP
8.10 Applications of PVF
8.10.1 Aircraft Interiors
8.10.2 Architectural Applications
8.10.3 Graphic Applications
8.10.4 Solar Applications
References
Part III. Fluoroelastomers
9. Fluorocarbon Elastomers
9.1 Manufacturing Process for Fluorocarbon Elastomers
9.1.1 Industrial Synthesis of Monomers for Fluorocarbon Elastomers
9.1.2 Polymerization and Finishing of Fluorocarbon Elastomers
9.1.2.1 Emulsion Polymerization
9.1.2.1.1 Continuous Emulsion Polymerization
9.1.2.1.2 Semi-Batch Emulsion Polymerization
9.1.2.2 Suspension Polymerization
9.2 Properties of Fluorocarbon Elastomers
9.2.1 Properties Related to the Polymer Structure
9.2.2 Other Properties
9.2.3 Properties of Currently Available Commercial Fluorocarbon Elastomers
9.2.3.1 FKM Type 1: Copolymers of HFP and VDF
9.2.3.2 FKM Type 2: Terpolymers of TFE, VDF, and HFP
9.2.3.3 FKM Type 3: Terpolymers of TFE, PMVE, and VDF
9.2.3.4 FKM Type 4: Terpolymers of TFE, P, and VDF
9.2.3.5 FKM Type 5: Pentapolymers of TFE, HFP, VDF, Ethylene, and PMVE
9.2.3.6 FFKM Perfluoroelastomers
9.2.3.7 FEPM
9.3 Fabrication Methods for Fluorocarbon Elastomers
9.3.1 Mixing and Processing of Compounds from Fluorocarbon Elastomers
9.3.1.1 Mixing of Compounds of Fluorocarbon Elastomers
9.3.1.2 Processing of Fluorocarbon Elastomers
9.3.1.2.1 Calandering
9.3.1.2.2 Extrusion
9.3.1.2.3 Solution and Latex Coating
9.3.2 Curing of Fluorocarbon Elastomers
9.3.2.1 Cross-Linking Chemistry
9.3.2.1.1 Cross-Linking by Ionic Mechanism
9.3.2.1.2 Cross-Linking by Free Radical Mechanism (Peroxide Cure)
9.3.2.1.3 Cross-Linking by Ionizing Radiation
9.3.2.2 Molding Processes
9.3.2.2.1 Compression Molding
9.3.2.2.2 Transfer Molding
9.3.2.2.3 Injection Molding
9.3.2.2.4 Molding of Fluorocarbon Elastomers
9.3.3 Post-Curing Process
9.4 Physical and Mechanical Properties of Cured Fluorocarbon Elastomers
9.4.1 Heat Resistance
9.4.2 Compression Set Resistance
9.4.3 Low-Temperature Flexibility
9.4.4 Resistance to Automotive Fuels
9.4.5 Resistance to Solvents and Chemicals
9.4.6 Steam Resistance
9.5 Formulation of Compounds of Fluorocarbon Elastomers
9.5.1 Fillers
9.5.2 Acid Acceptor Systems
9.5.3 Curatives
9.5.4 Plasticizers and Processing Aids
9.6 Applications of Fluorocarbon Elastomers
9.6.1 Applications of FKMs
9.6.1.1 Typical Automotive Applications
9.6.1.2 Typical Aerospace and Military Applications
9.6.1.3 Typical Chemical and Petrochemical Applications
9.6.1.4 Other Industrial Applications
9.6.2 Applications of FFKMs
9.6.3 Applications of FEPM
9.6.4 Applications of FKMs in Coatings and Sealants
9.6.5 Applications of FKMs as Polymeric Processing Additives
9.7 Examples of Fluorocarbon Elastomer Formulations
9.7.1 Typical Formulations of Fluoroelastomer Compounds
9.7.2 Rotary Seal for Airborne Applications
9.7.3 Compounds for Compression Molded Seals
9.7.4 Basic O-Ring Compounds
9.7.5 Compound for Closed Cell Sponge
9.7.6 Example of Compounds Based on FEPM (TFE/P) Elastomers
9.7.7 Example of Steam Resistant Formulations
9.7.8 Basic Extrusion Compounds
9.7.9 Example of FKM Compounds for Aerospace AMS 3216 and AMS 7276H
9.7.10 No Post-Cure Fluoroelastomer Articles
9.7.11 Low Temperature Service Seals
9.7.12 FFKM Compound for Aerospace-AMS 7257E
9.8 Fluoroelastomer Safety, Disposal, and Sustainability
9.8.1 Safety in Production
9.8.2 Safety in Applications
9.8.3 Disposal
9.8.4 Sustainability
References
10. Fluorinated Thermoplastic Elastomers
10.1 Introduction
10.2 Types of Fluorinated Thermoplastic Elastomers
10.3 Methods to Produce Fluorinated Thermoplastic Elastomers
10.4 Commercial Fluorinated Thermoplastic Elastomers and Their Properties
10.5 Applications of Fluorinated Thermoplastic Elastomers
10.5.1 Chemical and Semiconductor Industries
10.5.2 Electrical, and Wire and Cable
10.5.3 Other Applications
References
11. Fluoro-Inorganic Elastomers
11.1 Fluorosilicone Elastomers
11.1.1 Introduction
11.1.2 Polymerization Process for Fluorosilicone Elastomers
11.1.3 Processing of Fluorosilicone Elastomers and Compounds
11.1.4 Properties of Fluorosilicone Elastomer Compounds
11.1.4.1 Fluid and Chemical Resistance
11.1.4.2 Heat Resistance
11.1.4.3 Low Temperature Behavior
11.1.4.4 Electrical Properties
11.1.4.5 Surface Properties
11.1.5 Applications of Fluorosilicone Compounds
11.1.6 Fluorosilicone Liquid Systems
11.1.7 Toxicity and Safety
11.2 Polyphosphazene Elastomers
11.2.1 Introduction
11.2.2 Fluorinated Polyhosphazene Elastomers
11.2.2.1 Preparation
11.2.2.2 Properties
11.2.2.3 Applications
References
Part IV. Technology of Fluoropolymer Aqueous Systems
12. Characteristics and Properties of Fluoropolymer Aqueous Systems
12.1 PTFE Dispersions and Coatings
12.1.1 PTFE Aqueous Dispersions
12.1.2 PTFE Industrial Coatings
12.2 Other Perfluoroplastic Dispersions and Coatings
12.2.1 FEP Dispersions
12.2.2 FEP Industrial Coatings
12.2.3 PFA/MFA Dispersions and Coatings
12.2.3.1 PFA/MFA Dispersions
12.2.3.2 PFA Industrial Coatings
12.2.4 Modified PTFE Dispersions
12.2.5 Dispersions of PTFE Micropowders
12.3 Other Fluoroplastic Dispersions
12.3.1 Dispersions of PVDF
12.3.2 Dispersions of THV Fluoroplastics
12.4 Fluorocarbon Elastomers in Latex Form
References
13. Processing and Applications of Fluoropolymer Aqueous Systems
13.1 Introduction
13.2 Processing and Applications of PTFE Dispersions
13.2.1 Impregnation
13.2.2 Fabric Coating
13.2.2.1 Equipment
13.2.2.2 Formulations
13.2.2.3 Coating Process
13.2.2.4 Lamination
13.2.2.5 Applications of PTFE Coated Fabrics
13.2.3 Cast Films
13.2.3.1 Process and Equipment
13.2.3.2 Applications of PTFE Cast Films
13.2.4 Processing and Applications of Modified PTFE Dispersions
13.2.5 Processing and Applications of PTFE Micropowders
13.2.5.1 Addition to Paints
13.2.5.2 Addition to Elastomers
13.2.5.3 Addition to Oils and Greases
13.2.6 Other Processing and Applications of PTFE Aqueous Dispersions
13.3 Processing and Applications of Other Fluoropolymer Aqueous Systems
13.3.1 Aqueous Dispersions of FEP and PFA/MFA
13.3.2 Aqueous Dispersions of PVDF
13.3.3 Aqueous Dispersions of THV Fluoroplastics
13.3.4 Fluorocarbon Elastomers in Latex Form
13.4 Health and Safety
References
Part V. Other Fluoropolymers
14. Specialty Fluorinated Polymers
14.1 Amorphous Fluoropolymers
14.2 Fluorinated Acrylates
14.3 Fluorinated Polyurethanes
14.4 Fluorinated Thermoplastic Elastomers
14.5 Copolymers of Chlorotrifluoroethylene and Vinyl Ether
14.6 Perfluorinated Ionomers
References
15. Applications of Specialty Fluorinated Polymers
15.1 Applications of Amorphous Perfluoropolymers
15.2 Applications of Fluorinated Acrylates
15.2.1 Textile Finishes
15.2.2 Optical Fibers
15.2.3 Other Applications
15.3 Applications of Fluorinated Polyurethanes
15.3.1 Surface Coatings
15.3.2 Solvent-Based Coatings
15.3.3 Water-Based Coatings
15.3.4 Powder Coatings
15.3.5 Treatments of Textile, Leather, and Other Substrates
15.3.6 Medical and Dental Applications
15.3.7 Cladding for Optical Fibers
15.3.8 Elastomers
15.3.9 Other Applications
15.4 Applications of Fluorinated Thermoplastic Elastomers
15.5 Applications of Copolymers of CTFE and Vinyl Ether
15.6 Applications of Perfluorinated Ionomers
References
Part VI. Effects of Temperature and Other Variables on Fluoropolymers
16. Effect of Temperature on Fluoropolymers
16.1 Introduction
16.2 Thermal Stability of PTFE
16.3 Thermal Stability of Perfluorinated Copolymers of Tetrafluoroethylene
16.3.1 Fluorinated Ethylene Propylene Copolymer (FEP)
16.3.2 Thermal Stability of PFA
16.3.3 Thermal Stability of ETFE
16.3.4 Thermal Stability of ECTFE
16.3.5 Thermal Stability of PCTFE
16.3.6 Thermal Stability of PVDF
References
17. The Effect of the Environment on Fluoropolymers
17.1 Introduction
17.2 Polytetrafluoroethylene (PTFE)
17.3 Perfluorinated Copolymers of Tetrafluoroethylene
17.3.1 PFA and MFA
17.3.2 FEP
17.4 Ethylene Tetrafluoroethylene Copolymer
17.5 Polyvinylidene Fluoride (PVDF)
17.6 Polychlorotrifluoroethylene (PCTFE)
17.7 Ethylene Chlorotrifluoroethylene Copolymer (ECTFE)
17.8 Polyvinyl Fluoride (PVF)
References
18. The Effect of Radiation on Fluoropolymers
18.1 Introduction
18.2 Effects of Ionizing Radiation on Fluoroplastics
18.2.1 Effects of Ionizing Radiation on Perfluoroplastics
18.2.2 Effects of Ionizing Radiation on Other Fluoroplastics
18.3 Effects of Ionizing Radiation on Fluorocarbon Elastomers
18.3.1 Effects of Ionizing Radiation on the FKM Type of Fluorocarbon Elastomers
18.3.2 Effects of Ionizing Radiation on Perfluoroelastomers
18.3.3 Effects of Ionizing Radiation on TFE/P Elastomers
18.4 Effects of Ionizing Radiation on Fluorosilicone Elastomers
18.5 Effects of UV Radiation on Fluoropolymers
References
Part VII. Safety and Sustainability
19. Safety Aspects of Fluoropolymers
19.1 Introduction
19.2 Fluoropolymers: The Essential Plastic
19.3 Polymerization Aids
19.3.1 Replacement of Polymerization Aids
19.4 Tetrafluoroethylene
19.5 Toxicology of Fluoropolymers
19.6 Emissions During Processing
19.7 Polymer Fume Fever (PFF)
19.8 Fluoropolymer Dispersions
19.9 Hygiene and Personal Protective Equipment
References
20. Recycling, Reuse, and Disposal of Fluoropolymers
20.1 Introduction
20.2 Fluorine Ore: Fluorspar
20.3 Melt Processible Fluoropolymers
20.4 Polytetrafluoroethylene (PTFE)
20.5 PTFE Scrap Sources for Recycling
20.6 Routes to the Reuse of Polytetrafluoroethylene
20.6.1 Virgin PTFE
20.6.2 Physical Processing: Recycling
20.6.3 Physical Processing: Reprocessing
20.7 Disposal of Fluoropolymers
20.8 Chemical Recycling (“Upcycling”)
Notes
References
Appendix 1. Trade Names of Common Commercial Fluoropolymers and Films
Appendix 2. PTFE Granular Resins Used for Compression Molding or Ram Extrusion or Both
Appendix 3. PTFE Resins Produced from Dispersion.
Appendix 4. Applications of Fluoropolymer Films
Appendix 5. Tedlar® Film Designation Guide
Appendix 6. Heat Sealing Temperatures for Common
Bibliography
Glossary of Terms
Index

Citation preview

Technology of Fluoropolymers

This third edition has been updated and expanded, providing industrial chemists, technologists, environmental scientists, and engineers with an accurate, compact, and practical source of information on fluoropolymers. Highlighting existing and new industrial, military, medical, and consumer goods applications, this edition adds more detailed information on equipment and processing conditions. It explores breakthroughs in understanding property-structure relationships, new polymerization techniques, and the chemistry underlying polymers, such as melt-processable fluoroplastics. It also expands on the important properties of fluoropolymers, including heat and radiation degradation, health effects, and recycling. Features: • Revised, updated, and expanded to continue to provide an accurate, compact, and practical source of information on fluoropolymers • Explores the property-structure relationships, polymerization techniques, and the chemistry underlying polymers • Fluoropolymers rank high on the specialty polymers group and, due to their unique properties, are naturally part of the solution to the industrial sustainability challenges of the twenty-first century • Describes the technology of fluoropolymers, including thermoplastic and elastomeric products • Expands upon the important characteristics of fluoropolymers and their recycling.

Technology of Fluoropolymers A Concise Handbook

Third Edition

Jiri G. Drobny Drobny Polymer Associates

Sina Ebnesajjad FluoroConsultants Group

First edition published 2023 by CRC Press 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742 and by CRC Press 4 Park Square, Milton Park, Abingdon, Oxon, OX14 4RN © 2023 Jiri G. Drobny and Sina Ebnesajjad CRC Press is an imprint of Taylor & Francis Group, LLC Reasonable efforts have been made to publish reliable data and information, but the author and publisher cannot assume responsibility for the validity of all materials or the consequences of their use. The authors and publishers have attempted to trace the copyright holders of all material reproduced in this publication and apologize to copyright holders if permission to publish in this form has not been obtained. If any copyright material has not been acknowledged please write and let us know so we may rectify in any future reprint. Except as permitted under U.S. Copyright Law, no part of this book may be reprinted, reproduced, transmitted, or utilized in any form by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying, microfilming, and recording, or in any information storage or retrieval system, without written permission from the publishers. For permission to photocopy or use material electronically from this work, access www.copyright.com or contact the Copyright Clearance Center, Inc. (CCC), 222 Rosewood Drive, Danvers, MA 01923, 978-750-8400. For works that are not available on CCC please contact [email protected] Trademark notice: Product or corporate names may be trademarks or registered trademarks and are used only for identification and explanation without intent to infringe. ISBN: 978-1-032-01360-2 (hbk) ISBN: 978-1-032-06886-2 (pbk) ISBN: 978-1-003-20427-5 (ebk) DOI: 10.1201/9781003204275 Typeset in Times by SPi Technologies India Pvt Ltd (Straive)

Contents List of Abbreviations................................................................................................................................ xv Preface to the First Edition ..................................................................................................................... xix Preface to the Second Edition ................................................................................................................. xxi Preface to the Third Edition .................................................................................................................. xxiii About the Authors .................................................................................................................................. xxv

Part I

Overview of Fluoropolymers

1 Introduction ...................................................................................................................................... 3 Sina Ebnesajjad References .......................................................................................................................................... 8 2 Societal Benefits of Fluoropolymers ............................................................................................... 9 Sina Ebnesajjad 2.1 Basic Fluoropolymer Properties .............................................................................................9 2.2 Examples of Fluoropolymer Properties ..................................................................................9 2.3 Automotive Applications ......................................................................................................10 2.4 Aerospace Wire and Cable ....................................................................................................10 2.5 Aircraft Fuel Hoses ...............................................................................................................12 2.6 Heart Rhythm Management: The Implantable Cardioverter Defibrillator ............................13 2.7 Pediatric Heart Repair ...........................................................................................................14 2.8 Thread Sealant ......................................................................................................................15 2.9 Chemical Processing Industry-lined Pipes, Fittings, and Vessels .........................................16 2.10 Semiconductor Chip Fabrication ..........................................................................................18 2.11 Biomedical Applications .......................................................................................................19 2.12 PTFE Micropowders .............................................................................................................19 2.13 Applications of Fluoroelastomers in Transportation.............................................................19 2.14 Properties of Thermoplastic Fluoropolymers .......................................................................20 2.15 Delving Deeper into Properties .............................................................................................20 2.16 Forces Affecting the Fluoropolymer Industries ....................................................................22 References ........................................................................................................................................22

Part II Thermoplastic Fluoropolymers 3 Synthesis and Properties of Monomers of Thermoplastic Fluoropolymers .............................. 27 Sina Ebnesajjad 3.1 3.2 3.3 3.4 3.5 3.6

Preparation of Tetrafluoroethylene....................................................................................... 27 Properties of Tetrafluoroethylene ......................................................................................... 29 Preparation of Hexafluoropropylene .................................................................................... 30 Properties of Hexafluoropropylene ...................................................................................... 30 Synthesis of Perfluoroalkylvinylethers ................................................................................ 31 Properties of Perfluoroalkylvinylethers ............................................................................... 32 v

vi

Contents 3.7 Synthesis of Chlorotrifluoroethylene (CTFE) ....................................................................... 32 3.8 Properties of Chlorotrifluoroethylene ................................................................................... 33 3.9 Synthesis of Vinylidene Fluoride .......................................................................................... 33 3.10 Properties of Vinylidene Fluoride ......................................................................................... 35 3.11 Synthesis of Vinyl Fluoride ................................................................................................... 35 3.12 Properties of Vinyl Fluoride .................................................................................................. 35 References ........................................................................................................................................ 36

4 Polymerization of Commercial Thermoplastic Fluoropolymers................................................39 Sina Ebnesajjad 4.1

Polymerization of Tetrafluoroethylene..................................................................................39 4.1.1 Granular Resins .......................................................................................................40 4.1.2 Fine Powder Resins .................................................................................................43 4.1.3 Aqueous Dispersions...............................................................................................44 4.1.4 Filled Compounds ...................................................................................................44 4.1.5 Modified PTFE ........................................................................................................44 4.2 Fluorinated Ethylene Propylene ............................................................................................45 4.2.1 Industrial Process for the Production of FEP ..........................................................45 4.3 Perfluoroalkoxy Resin...........................................................................................................45 4.3.1 Industrial Process for the Production of Perfluoroalkoxy Resins ...........................45 4.4 Polychlorotrifluoroethylene ..................................................................................................46 4.4.1 Industrial Process for the Production of Polychlorotrifluoroethylene.....................46 4.5 Polyvinylidene Fluoride ........................................................................................................46 4.5.1 Industrial Process for the Production of Polyvinylidene Fluoride ..........................46 4.6 Polyvinyl Fluoride.................................................................................................................47 4.6.1 Industrial Process for the Production of Polyvinyl Fluoride...................................47 4.7 Ethylene Chlorotrifluoroethylene Copolymer.......................................................................47 4.7.1 Industrial Process for the Production of Ethylene Chlorotrifluoroethylene ............47 4.8 Ethylene Tetrafluoroethylene Copolymer .............................................................................47 4.8.1 Industrial Process for the Production of Ethylene Tetrafluoroethylene ..................47 4.9 Terpolymers of Tetrafluoroethylene, Hexafluoropropylene, and Vinylidene Fluoride (THV Fluoroplastic) ............................................................................................... 48 4.10 Terpolymers and Quarterpolymers of Hexafluoropropylene, Tetrafluoroethylene, and Ethylene..........................................................................................................................48 References ........................................................................................................................................ 48 5 Properties of Commercial Thermoplastic Fluoropolymers ........................................................ 51 Jiri G. Drobny 5.1

5.2

Properties as Related to the Structure of Fluoropolymers .................................................... 51 5.1.1 Fluoroplastics .......................................................................................................... 51 5.1.1.1 Mechanical Properties ............................................................................ 53 5.1.1.2 Optical Properties ................................................................................... 53 5.1.2 Fluoroelastomers ..................................................................................................... 54 Properties of Individual Commercial Fluoroplastics ............................................................ 55 5.2.1 Polytetrafluoroethylene ........................................................................................... 55 5.2.1.1 Molecular Weight.................................................................................... 55 5.2.1.2 Molecular Conformation ........................................................................ 55 5.2.1.3 Crystallinity and Melting Behavior ........................................................ 56 5.2.1.4 Mechanical Properties ............................................................................ 57 5.2.1.5 Surface Properties ................................................................................... 57 5.2.1.6 Absorption and Permeation .................................................................... 57

Contents

vii

5.2.1.7 Electrical Properties ................................................................................ 58 Modified Polytetrafluoroethylene............................................................................ 58 Copolymers of Tetrafluoroethylene and Hexafluoropropylene (FEP) .................... 59 5.2.3.1 Mechanical Properties ............................................................................ 59 5.2.3.2 Electrical Properties ................................................................................ 60 5.2.3.3 Chemical Properties ................................................................................ 60 5.2.3.4 Optical Properties ................................................................................... 61 5.2.3.5 Other Properties ...................................................................................... 61 5.2.4 Copolymers of Tetrafluoroethylene and Perfluoroalkyl Ethers (PFA and MFA)............................................................................................ 61 5.2.4.1 Physical and Mechanical Properties ....................................................... 61 5.2.4.2 Electrical Properties ................................................................................ 62 5.2.4.3 Optical Properties ................................................................................... 62 5.2.4.4 Chemical Properties ................................................................................ 62 5.2.5 Copolymers of Ethylene and Tetrafluoroethylene (ETFE) ..................................... 62 5.2.5.1 Structure and Related Properties ............................................................ 63 5.2.5.2 Mechanical, Chemical, and Other Properties ......................................... 63 5.2.6 Polyvinylidene Fluoride (PVDF) ............................................................................ 64 5.2.6.1 Mechanical Properties ............................................................................ 64 5.2.6.2 Electrical Properties ................................................................................ 64 5.2.6.3 Chemical Properties ................................................................................ 66 5.2.7 Polychlorotrifluoroethylene (PCTFE) ..................................................................... 66 5.2.7.1 Thermal Properties.................................................................................. 66 5.2.7.2 Mechanical, Chemical, and Other Properties ......................................... 66 5.2.8 Copolymer of Ethylene and Chlorotrifluoroethylene (ECTFE) .............................. 67 5.2.8.1 Properties of ECTFE............................................................................... 67 5.2.9 Terpolymer of Tetrafluoroethylene, Hexafluoropropylene, and Vinylidene Fluoride (THV Fluoroplastic) ................................................................................. 68 5.2.9.1 Properties ................................................................................................ 68 5.2.10 Terpolymer of Ethylene, Tetrafluoroethylene, and Hexafluoropropylene (EFEP) ........................................................................... 69 5.2.11 Polyvinyl Fluoride (PVF)........................................................................................ 70 5.2.11.1 Properties of the PVF Polymer ............................................................... 70 5.2.11.2 Polyvinyl Fluoride Films and Their Properties....................................... 71 References ........................................................................................................................................ 74 5.2.2 5.2.3

6 Processing of Polytetrafluoroethylene Resins .............................................................................. 77 Jiri G. Drobny 6.1

6.2

Processing of Granular Resins .............................................................................................. 77 6.1.1 Compression Molding ............................................................................................. 80 6.1.1.1 Preforming .............................................................................................. 81 6.1.1.2 Sintering.................................................................................................. 83 6.1.2 Other Molding Methods .......................................................................................... 86 6.1.3 Ram Extrusion......................................................................................................... 88 Processing of Fine Powders .................................................................................................. 88 6.2.1 Introduction ............................................................................................................. 88 6.2.2 Fabrication Methods for Products from Fine Powders ........................................... 95 6.2.2.1 Preparation of the Extrusion Mix ........................................................... 95 6.2.2.2 Preforming .............................................................................................. 96 6.2.2.3 Extrusion ................................................................................................. 96 6.2.3 Fabrication of Films, Tapes, and Sealing Cords...................................................... 98 6.2.3.1 Manufacture of Unsintered Tape ............................................................ 98

viii

Contents 6.2.4

Fabrication of Tubing and Hoses .......................................................................... 100 6.2.4.1 Tube Extrusion ...................................................................................... 101 6.2.4.2 Drying and Sintering of Tubes.............................................................. 101 6.2.5 Fabrication of Thick-Walled Pipes and Liners ...................................................... 101 6.2.5.1 Liner Extrusion ..................................................................................... 101 6.2.5.2 Drying and Sintering the Liner ............................................................. 102 6.2.6 Fabrication of Wire and Cable Insulation ............................................................. 102 6.2.6.1 Wire Extruder System ........................................................................... 102 6.2.6.2 Wire Extrusion Process ......................................................................... 102 6.2.6.3 Drying and Sintering of Wire Insulation .............................................. 103 6.2.7 Expanded PTFE .................................................................................................... 104 6.2.7.1 The Expansion Process ......................................................................... 104 References ...................................................................................................................................... 107 7 Processing of Melt-Processible Fluoroplastics ........................................................................... 109 Jiri G. Drobny 7.1

Melt-Processible Perfluoroplastics...................................................................................... 110 7.1.1 Copolymers of Tetrafluoroethylene and Hexafluoropropylene: Fluorinated Ethylene Propylene ............................................................................ 110 7.1.2 Copolymers of Tetrafluoroethylene and Perfluoroalkyl Ethers (PFA and MFA).......................................................................................... 110 7.2 Processing of Other Melt-Processible Fluoroplastics ......................................................... 111 7.2.1 Copolymers of Ethylene and Tetrafluoroethylene (ETFE) ................................... 111 7.2.2 Polyvinylidene Fluoride (PVDF) .......................................................................... 111 7.2.3 Polychlorotrifluoroethylene (PCTFE) ................................................................... 112 7.2.4 Copolymers of Ethylene and Chlorotrifluoroethylene (ECTFE) .......................... 112 7.2.5 Terpolymers of Tetrafluoroethylene, Hexafluoropropylene, and Vinylidene Fluoride (THV Fluoroplastics).............................................................................. 112 7.2.6 Terpolymer of Ethylene, Tetrafluoroethylene, and Hexafluoropropylene: (EFEP) ............................................................................... 112 References ...................................................................................................................................... 113

8 Applications of Commercial Thermoplastic Fluoropolymers .................................................. 115 Jiri G. Drobny 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10

Applications of PTFE and Modified PTFE ......................................................................... 115 Applications of FEP ............................................................................................................ 117 Applications of PFA and MFA............................................................................................ 118 Applications of ETFE ......................................................................................................... 118 Applications of PVDF......................................................................................................... 120 Applications of PCTFE ....................................................................................................... 121 Applications of ECTFE....................................................................................................... 122 Applications of THV Fluoroplastics ................................................................................... 125 Applications of EFEP ......................................................................................................... 126 Applications of PVF ........................................................................................................... 126 8.10.1 Aircraft Interiors ................................................................................................... 126 8.10.2 Architectural Applications .................................................................................... 127 8.10.3 Graphic Applications............................................................................................. 128 8.10.4 Solar Applications ................................................................................................. 128 References ...................................................................................................................................... 129

Contents

Part III

ix

Fluoroelastomers

9 Fluorocarbon Elastomers ............................................................................................................ 133 Jiri G. Drobny 9.1

9.2

9.3

9.4

9.5.

9.6

Manufacturing Process for Fluorocarbon Elastomers......................................................... 135 9.1.1 Industrial Synthesis of Monomers for Fluorocarbon Elastomers ......................... 135 9.1.2 Polymerization and Finishing of Fluorocarbon Elastomers .................................. 136 9.1.2.1. Emulsion Polymerization ..................................................................... 137 9.1.2.2. Suspension Polymerization................................................................... 139 Properties of Fluorocarbon Elastomers ............................................................................... 141 9.2.1 Properties Related to the Polymer Structure ......................................................... 141 9.2.2 Other Properties .................................................................................................... 144 9.2.3 Properties of Currently Available Commercial Fluorocarbon Elastomers ............ 144 9.2.3.1 FKM Type 1: Copolymers of HFP and VDF ........................................ 144 9.2.3.2 FKM Type 2: Terpolymers of TFE, VDF, and HFP.............................. 145 9.2.3.3 FKM Type 3: Terpolymers of TFE, PMVE, and VDF.......................... 145 9.2.3.4 FKM Type 4: Terpolymers of TFE, P, and VDF ................................... 145 9.2.3.5 FKM Type 5: Pentapolymers of TFE, HFP, VDF, Ethylene, and PMVE ............................................................................ 146 9.2.3.6. FFKM Perfluoroelastomers .................................................................. 146 9.2.3.7. FEPM .................................................................................................... 147 Fabrication Methods for Fluorocarbon Elastomers ............................................................ 150 9.3.1 Mixing and Processing of Compounds from Fluorocarbon Elastomers ............... 150 9.3.1.1 Mixing of Compounds of Fluorocarbon Elastomers ............................ 150 9.3.1.2 Processing of Fluorocarbon Elastomers ............................................... 150 9.3.2 Curing of Fluorocarbon Elastomers ...................................................................... 154 9.3.2.1 Cross-Linking Chemistry ..................................................................... 155 9.3.2.2 Molding Processes ................................................................................ 157 9.3.3 Post-Curing Process .............................................................................................. 161 Physical and Mechanical Properties of Cured Fluorocarbon Elastomers ........................... 161 9.4.1 Heat Resistance ..................................................................................................... 162 9.4.2 Compression Set Resistance ................................................................................. 162 9.4.3 Low-Temperature Flexibility ................................................................................ 162 9.4.4 Resistance to Automotive Fuels ............................................................................ 163 9.4.5 Resistance to Solvents and Chemicals .................................................................. 164 9.4.6 Steam Resistance................................................................................................... 164 Formulation of Compounds of Fluorocarbon Elastomers................................................... 164 9.5.1 Fillers .................................................................................................................... 164 9.5.2 Acid Acceptor Systems ......................................................................................... 164 9.5.3 Curatives................................................................................................................ 165 9.5.4 Plasticizers and Processing Aids ........................................................................... 166 Applications of Fluorocarbon Elastomers .......................................................................... 167 9.6.1 Applications of FKMs ........................................................................................... 167 9.6.1.1 Typical Automotive Applications ......................................................... 168 9.6.1.2 Typical Aerospace and Military Applications....................................... 168 9.6.1.3 Typical Chemical and Petrochemical Applications .............................. 170 9.6.1.4 Other Industrial Applications................................................................ 170 9.6.2 Applications of FFKMs ........................................................................................ 171 9.6.3 Applications of FEPM .......................................................................................... 172

x

Contents 9.6.4 Applications of FKMs in Coatings and Sealants .................................................. 173 9.6.5 Applications of FKMs as Polymeric Processing Additives .................................. 173 9.7 Examples of Fluorocarbon Elastomer Formulations .......................................................... 174 9.7.1 Typical Formulations of Fluoroelastomer Compounds......................................... 175 9.7.2 Rotary Seal for Airborne Applications .................................................................. 175 9.7.3 Compounds for Compression Molded Seals ......................................................... 175 9.7.4 Basic O-Ring Compounds .................................................................................... 176 9.7.5 Compound for Closed Cell Sponge ...................................................................... 177 9.7.6 Example of Compounds Based on FEPM (TFE/P) Elastomers ............................ 177 9.7.7 Example of Steam Resistant Formulations ........................................................... 178 9.7.8 Basic Extrusion Compounds ................................................................................. 178 9.7.9 Example of FKM Compounds for Aerospace AMS 3216 and AMS 7276H ........ 179 9.7.10 No Post-Cure Fluoroelastomer Articles ................................................................ 180 9.7.11 Low Temperature Service Seals ............................................................................ 180 9.7.12 FFKM Compound for Aerospace-AMS 7257E .................................................... 181 9.8 Fluoroelastomer Safety, Disposal, and Sustainability......................................................... 182 9.8.1 Safety in Production .............................................................................................. 182 9.8.2 Safety in Applications ........................................................................................... 183 9.8.3 Disposal ................................................................................................................. 183 9.8.4 Sustainability ......................................................................................................... 183 References ...................................................................................................................................... 184

10 Fluorinated Thermoplastic Elastomers ...................................................................................... 187 Jiri G. Drobny 10.1 10.2 10.3 10.4 10.5

Introduction ......................................................................................................................... 187 Types of Fluorinated Thermoplastic Elastomers................................................................. 187 Methods to Produce Fluorinated Thermoplastic Elastomers .............................................. 187 Commercial Fluorinated Thermoplastic Elastomers and Their Properties ......................... 189 Applications of Fluorinated Thermoplastic Elastomers...................................................... 193 10.5.1 Chemical and Semiconductor Industries............................................................... 193 10.5.2 Electrical, and Wire and Cable .............................................................................. 193 10.5.3 Other Applications ................................................................................................ 193 References ...................................................................................................................................... 193

11 Fluoro-Inorganic Elastomers ...................................................................................................... 195 Jiri G. Drobny 11.1

11.2

Fluorosilicone Elastomers ................................................................................................... 195 11.1.1 Introduction ........................................................................................................... 195 11.1.2 Polymerization Process for Fluorosilicone Elastomers ........................................ 196 11.1.3 Processing of Fluorosilicone Elastomers and Compounds ................................... 196 11.1.4 Properties of Fluorosilicone Elastomer Compounds ............................................ 197 11.1.4.1 Fluid and Chemical Resistance............................................................. 197 11.1.4.2 Heat Resistance..................................................................................... 197 11.1.4.3 Low Temperature Behavior .................................................................. 198 11.1.4.4 Electrical Properties .............................................................................. 199 11.1.4.5 Surface Properties ................................................................................. 199 11.1.5 Applications of Fluorosilicone Compounds ......................................................... 199 11.1.6 Fluorosilicone Liquid Systems.............................................................................. 200 11.1.7 Toxicity and Safety ............................................................................................... 202 Polyphosphazene Elastomers .............................................................................................. 202 11.2.1 Introduction ........................................................................................................... 202

Contents

xi

11.2.2 Fluorinated Polyhosphazene Elastomers .............................................................. 203 11.2.2.1 Preparation ............................................................................................ 203 11.2.2.2 Properties .............................................................................................. 203 11.2.2.3 Applications .......................................................................................... 204 References ...................................................................................................................................... 204

Part IV Technology of Fluoropolymer Aqueous Systems 12 Characteristics and Properties of Fluoropolymer Aqueous Systems ...................................... 209 Jiri G. Drobny 12.1

PTFE Dispersions and Coatings ......................................................................................... 209 12.1.1 PTFE Aqueous Dispersions .................................................................................. 209 12.1.2 PTFE Industrial Coatings ...................................................................................... 212 12.2 Other Perfluoroplastic Dispersions and Coatings ............................................................... 212 12.2.1 FEP Dispersions .................................................................................................... 212 12.2.2 FEP Industrial Coatings ........................................................................................ 213 12.2.3 PFA/MFA Dispersions and Coatings .................................................................... 213 12.2.3.1 PFA/MFA Dispersions .......................................................................... 213 12.2.3.2 PFA Industrial Coatings ........................................................................ 214 12.2.4 Modified PTFE Dispersions .................................................................................. 214 12.2.5 Dispersions of PTFE Micropowders ..................................................................... 214 12.3 Other Fluoroplastic Dispersions ......................................................................................... 215 12.3.1 Dispersions of PVDF ............................................................................................ 215 12.3.2 Dispersions of THV Fluoroplastics ....................................................................... 215 12.4 Fluorocarbon Elastomers in Latex Form ............................................................................ 216 References ...................................................................................................................................... 218 13 Processing and Applications of Fluoropolymer Aqueous Systems........................................... 219 Jiri G. Drobny 13.1 13.2

13.3

Introduction ......................................................................................................................... 219 Processing and Applications of PTFE Dispersions ............................................................. 219 13.2.1 Impregnation ......................................................................................................... 220 13.2.2 Fabric Coating ....................................................................................................... 220 13.2.2.1 Equipment ............................................................................................. 220 13.2.2.2 Formulations ......................................................................................... 224 13.2.2.3 Coating Process .................................................................................... 224 13.2.2.4 Lamination ............................................................................................ 225 13.2.2.5 Applications of PTFE Coated Fabrics .................................................. 225 13.2.3 Cast Films ............................................................................................................. 229 13.2.3.1 Process and Equipment ......................................................................... 229 13.2.3.2 Applications of PTFE Cast Films ......................................................... 231 13.2.4 Processing and Applications of Modified PTFE Dispersions ............................... 232 13.2.5 Processing and Applications of PTFE Micropowders .......................................... 232 13.2.5.1 Addition to Paints ................................................................................. 232 13.2.5.2 Addition to Elastomers ......................................................................... 232 13.2.5.3 Addition to Oils and Greases ................................................................ 232 13.2.6 Other Processing and Applications of PTFE Aqueous Dispersions ...................... 232 Processing and Applications of Other Fluoropolymer Aqueous Systems .......................... 233 13.3.1 Aqueous Dispersions of FEP and PFA/MFA ........................................................ 233 13.3.2 Aqueous Dispersions of PVDF ............................................................................. 233

xii

Contents 13.3.3 Aqueous Dispersions of THV Fluoroplastics ....................................................... 234 13.3.4 Fluorocarbon Elastomers in Latex Form............................................................... 234 13.4 Health and Safety ................................................................................................................ 236 References ...................................................................................................................................... 237

Part V

Other Fluoropolymers

14 Specialty Fluorinated Polymers .................................................................................................. 241 Sina Ebnesajjad 14.1 Amorphous Fluoropolymers ............................................................................................... 241 14.2 Fluorinated Acrylates .......................................................................................................... 244 14.3 Fluorinated Polyurethanes .................................................................................................. 244 14.4 Fluorinated Thermoplastic Elastomers ............................................................................... 245 14.5 Copolymers of Chlorotrifluoroethylene and Vinyl Ether .................................................... 245 14.6 Perfluorinated Ionomers ...................................................................................................... 246 References ...................................................................................................................................... 247 15 Applications of Specialty Fluorinated Polymers ....................................................................... 249 Sina Ebnesajjad 15.1 15.2

Applications of Amorphous Perfluoropolymers ................................................................. 249 Applications of Fluorinated Acrylates ................................................................................ 250 15.2.1 Textile Finishes ..................................................................................................... 250 15.2.2 Optical Fibers ........................................................................................................ 250 15.2.3 Other Applications ................................................................................................ 250 15.3 Applications of Fluorinated Polyurethanes ......................................................................... 250 15.3.1 Surface Coatings ................................................................................................... 250 15.3.2 Solvent-Based Coatings ........................................................................................ 251 15.3.3 Water-Based Coatings ........................................................................................... 251 15.3.4 Powder Coatings ................................................................................................... 251 15.3.5 Treatments of Textile, Leather, and Other Substrates ........................................... 251 15.3.6 Medical and Dental Applications .......................................................................... 251 15.3.7 Cladding for Optical Fibers................................................................................... 251 15.3.8 Elastomers ............................................................................................................. 252 15.3.9 Other Applications ................................................................................................ 252 15.4 Applications of Fluorinated Thermoplastic Elastomers...................................................... 252 15.5 Applications of Copolymers of CTFE and Vinyl Ether ...................................................... 252 15.6 Applications of Perfluorinated Ionomers ............................................................................ 252 References ...................................................................................................................................... 253

Part VI

Effects of Temperature and Other Variables on Fluoropolymers

16 Effect of Temperature on Fluoropolymers ................................................................................. 257 Sina Ebnesajjad 16.1 16.2 16.3

Introduction ......................................................................................................................... 257 Thermal Stability of PTFE .................................................................................................. 257 Thermal Stability of Perfluorinated Copolymers of Tetrafluoroethylene ........................... 258 16.3.1 Fluorinated Ethylene Propylene Copolymer (FEP) .............................................. 259 16.3.2 Thermal Stability of PFA ...................................................................................... 260

Contents

xiii

16.3.3 Thermal Stability of ETFE .................................................................................... 261 16.3.4 Thermal Stability of ECTFE ................................................................................. 261 16.3.5 Thermal Stability of PCTFE ................................................................................. 261 16.3.6 Thermal Stability of PVDF ................................................................................... 262 References ...................................................................................................................................... 263 17 The Effect of the Environment on Fluoropolymers .................................................................. 265 Sina Ebnesajjad 17.1 17.2 17.3

Introduction ......................................................................................................................... 265 Polytetrafluoroethylene (PTFE) .......................................................................................... 265 Perfluorinated Copolymers of Tetrafluoroethylene ............................................................. 266 17.3.1 PFA and MFA........................................................................................................ 266 17.3.2 FEP ........................................................................................................................ 267 17.4 Ethylene Tetrafluoroethylene Copolymer ........................................................................... 267 17.5 Polyvinylidene Fluoride (PVDF) ........................................................................................ 267 17.6 Polychlorotrifluoroethylene (PCTFE) ................................................................................. 268 17.7 Ethylene Chlorotrifluoroethylene Copolymer (ECTFE) ..................................................... 268 17.8 Polyvinyl Fluoride (PVF).................................................................................................... 268 References ...................................................................................................................................... 269

18 The Effect of Radiation on Fluoropolymers .............................................................................. 271 Jiri G. Drobny 18.1 18.2

Introduction ......................................................................................................................... 271 Effects of Ionizing Radiation on Fluoroplastics ................................................................. 272 18.2.1 Effects of Ionizing Radiation on Perfluoroplastics ............................................... 272 18.2.2 Effects of Ionizing Radiation on Other Fluoroplastics ......................................... 273 18.3 Effects of Ionizing Radiation on Fluorocarbon Elastomers ................................................ 274 18.3.1 Effects of Ionizing Radiation on the FKM Type of Fluorocarbon Elastomers ..... 274 18.3.2 Effects of Ionizing Radiation on Perfluoroelastomers .......................................... 274 18.3.3 Effects of Ionizing Radiation on TFE/P Elastomers ............................................. 274 18.4 Effects of Ionizing Radiation on Fluorosilicone Elastomers .............................................. 274 18.5 Effects of UV Radiation on Fluoropolymers ...................................................................... 275 References ...................................................................................................................................... 275

Part VII

Safety and Sustainability

19 Safety Aspects of Fluoropolymers ............................................................................................... 279 Sina Ebnesajjad 19.1 19.2 19.3

Introduction ......................................................................................................................... 279 Fluoropolymers: The Essential Plastic ................................................................................ 280 Polymerization Aids ............................................................................................................ 280 19.3.1 Replacement of Polymerization Aids .................................................................... 281 19.4 Tetrafluoroethylene ............................................................................................................. 281 19.5 Toxicology of Fluoropolymers............................................................................................ 283 19.6 Emissions During Processing ............................................................................................. 283 19.7 Polymer Fume Fever (PFF)................................................................................................. 284 19.8 Fluoropolymer Dispersions ................................................................................................. 285 19.9 Hygiene and Personal Protective Equipment ...................................................................... 286 References ...................................................................................................................................... 286

xiv

Contents

20 Recycling, Reuse, and Disposal of Fluoropolymers................................................................... 287 Sina Ebnesajjad 20.1 20.2 20.3 20.4 20.5 20.6

Introduction ......................................................................................................................... 287 Fluorine Ore: Fluorspar....................................................................................................... 287 Melt Processible Fluoropolymers ....................................................................................... 288 Polytetrafluoroethylene (PTFE) .......................................................................................... 288 PTFE Scrap Sources for Recycling ..................................................................................... 289 Routes to the Reuse of Polytetrafluoroethylene .................................................................. 292 20.6.1 Virgin PTFE .......................................................................................................... 292 20.6.2 Physical Processing: Recycling............................................................................. 292 20.6.3 Physical Processing: Reprocessing ....................................................................... 293 20.7 Disposal of Fluoropolymers ................................................................................................ 293 20.8 Chemical Recycling (“Upcycling”) .................................................................................... 293 Notes............................................................................................................................................... 295 References ...................................................................................................................................... 295

Appendix 1

Trade Names of Common Commercial Fluoropolymers and Films .............................. 297

Appendix 2

PTFE Granular Resins Used for Compression Molding or Ram Extrusion or Both ..... 299

Appendix 3

PTFE Resins Produced from Dispersion ........................................................................ 301

Appendix 4

Applications of Fluoropolymer Films ............................................................................ 303

Appendix 5

Tedlar® Film Designation Guide .................................................................................... 305

Appendix 6

Heat Sealing Temperatures for Common ....................................................................... 307

Bibliography ........................................................................................................................................ 309 Glossary of Terms ................................................................................................................................ 311 Index ...................................................................................................................................................... 317

Abbreviations APA APET ASTM BMI CD CMD CSM CTE CTFE DIN DMI DTM E EB ECTFE EFEP ETFE FEP FEPM FEVE FFKM FKM FMQ FPFPE FPM FPU FTIR FTPE FVE FVMQ FZ Gy HDPE HFIB HFP HPFP IPN IR ISO JIS LAN LIM LLDPE LOI MA MD

Advanced Polymer Architecture Amorphous polyethylene terephtalate American Society for Testing and Materials (now ASTM International) Bismaleimide Cross-direction Cross-machine direction Cure site monomer Coefficient of thermal expansion Chlorotrifluoroethylene Deutsches Institut für Normung eV (German Institute for Standardization) Bismaleimide Differential thermal analysis Ethylene Electron beam Copolymer of ethylene and chlorotrifluoroethylene Ethylene-tetrafluoroethylene-hexafluoropropylene terpolymer Copolymer of ethylene and tetrafluoroethylene Fluorinated ethylene-propylene (copolymer of tetrafluoroethylene and hexafluoropropylene) Copolymer of tetrafluoroethylene and propylene Fluorinated ethylene vinyl ether Perfluoroelastomer Fluorocarbon elastomer Fluorosilicone Functionalized perfluorinated polyether ISO designation for fluorocarbon elastomer of the FKM type (ASTM) Fluorinated polyurethane Fourier Transform Infrared Spectroscopy Fluorinated thermoplastic elastomer Fluorovinyl ether Fluoro-vinyl polysiloxane Polyphosphazene elastomer Grey (SI unit of radiation dose, larger, more widely used unit is kGy) High-density polyethylene Hexafluoroisobutylene Hexafluoropropylene Hydropentafluoropropylene Interpenetrating network Infrared International Organization for Standardization Japanese Industrial Standard Local area network Liquid injection molding Linear low density polyethylene Limiting oxygen index Maleic anhydride Machine direction xv

xvi MDO MFA MVE Mn Mw MQ MWD NBS NIST OI P P (or PP) PA PAS PAVE PCTFE PDD PE PES PETG PFA PFEVE PFOA PFOS PI PMTFPS PMVE P or PP PPVE PTFE P, PUR PVC PVDF PVF RF RoHS RR SBS SEM SI SKF SSG Tg Tm TAC TAIC TD TDO TFE TGA THV

Abbreviations Machine direction orientation Copolymer of tetrafluoroethylene and tetrafluoroethylene and perfluoromethyl vinyl ether Methyl vinyl ether Number average molecular weight Weight average molecular weight Silicone resins Molecular weight distribution National Bureau of Standards (in 1988 changed to NIST, see below) National Institute of Standards and Technology Orientation ratio Poise (unit of dynamic viscosity, superseded by SI unit of Pa∙s) Polypropylene Polyamide Polyarylsulfone Perfluoroalkyl vinyl ether Polychlorotrifluoroethylene Perfluoro-2,2-dimethyl dioxole Polyethylene Polyethylsulfone Glycol-modified polyethylene terephtalate Perfluoroalkoxy polymer (copolymer of tetrafluoroethylene and perfluoropropyl vinyl ether) Poly(fluoroethylene vinyl ether) Perfluorooctanoic acid Perfluorooctanesulfonate Polyimide Polymethyltrifluoropropylsiloxane or poly[methyl(3,3,3-trifluoropropylsiloxane) Perfluoromethyl vinyl ether Polypropylene Perfluoropropyl vinyl ether Polytetrafluoroethylene Polyurethane Polyvinyl chloride Polyvinylidene fluoride Polyvinyl fluoride Radiofrequency Restriction of hazardous substance Reduction ratio Styrene-butadiene-styrene block copolymer Scanning electron microscope International system of units Fluorocarbon elastomer Standard specific gravity, Glass transition temperature Crystalline melting point Triallyl cyanaurate Triallyl isocyanurate Transverse direction (cross-machine direction) Transverse direction orientation Tetrafluoroethylene Thermogravimetric analysis Terpolymer of tetrafluoroethylene, hexafluoropropylene, and vinylidene fluoride (THV Fluoroplastic, product of 3M Dyneon)

Abbreviations TMPTA TMPTMA UL UV VDF VF VOC

Trimethylolpropane triacrylate Trimethylolpropane trimethacrylate Underwriters Laboratory Ultraviolet Vinylidene fluoride (also VF2) Vinyl fluoride Volatile organic compounds

xvii

Preface to the First Edition The first major endeavor to review the growing field of fluoropolymers was the book Fluorocarbons by M. A. Rudner published by Reinhold Publishing Corporation in 1958 (second printing, 1964), covering the state of the art of fluoropolymer technology. The next major publication, which focused on the chemistry and physics of these materials, was Fluoropolymers, edited by L. A. Wall in 1972, published by Wiley Interscience. Without doubt, it has been and still is a valuable resource to scientists doing academic and basic research, but it placed relatively little emphasis on practical applications. Information applicable to industrial practice, whether development or manufacturing, has been available mostly in encyclopedias, such as the Kirk-Othmer Encyclopedia of Chemical Technology or the Polymer Materials Encyclopedia, and occasional magazine articles. The work Modern Fluoropolymers: High Performance Fluoropolymers for Diverse Applications, published in 1997 by John Wiley and Sons in the Wiley Series in Polymer Science and edited by J. Scheirs, covers the significant advancements in the field over the past decade or so. It is a collection of chapters written by a number of experts in their respective fields with an emphasis on structure/property behavior and diverse applications of the individual fluoropolymers. Technology of Fluoropolymers has the goal of providing systematic fundamental information to professionals working in industrial practice. The main intended audience is chemists or chemical engineers new to fluoropolymer technology, whether the synthesis of a monomer, polymerization, or a process leading to a product. Another reader of this book may be a product or process designer looking for specific properties in a polymeric material. It can also be a useful resource for recent college and university graduates. Because of the breadth of the field and the wide variety of the polymeric materials involved, it does not go into details; this is left to publications of a much larger size. Rather, it covers the essentials and points the reader toward sources of more specific and/or detailed information. With this in mind, this book is divided into nine separate sections, covering the chemistry of fluoropolymers, their properties, processing, and applications. A distinction is made between fluoroplastics and fluoroelastomers because of the differences in processing and in the final properties, as well as in applications. Technology, i.e., processing and applications, is combined into one chapter. Other topics include effects of heat, radiation, and weathering. Because processing of water-based systems is a distinct technology, it is covered in a separate chapter. Materials that have become commercially available during the past decade or so and some of their applications are included in Chapter 8. Chapter 9 covers recycling. This book began as lectures and seminars given at the Plastics Engineering Department of the University of Massachusetts at Lowell and to varied professional groups and companies. It draws on the author’s more than 40 years of experience as a research and development professional and more recently as an independent international consultant. My thanks are due to the team from CRC Press particularly to Carole Gustafson, Gerald Papke, and Helena Redshaw for bringing this work to fruition and to my family for continuing support. Special thanks go to my daughter, Jirina, for meticulous typing and help in finishing the manuscript, and to Ms. Kimberly Riendeau for expert help with illustrations. Helpful comments and recommendations by Dr. T. L. Miller from DeWAL Industries are highly appreciated. Jiri George Drobny Merrimack, New Hampshire, January 2000

xix

Preface to the Second Edition The first edition of Technology of Fluoropolymers had the main goal to provide systematic fundamental information to professionals working in industrial practice. Since its publication in 2001 the industry has changed. Many technological developments have taken place, new applications were developed, and companies were sold and bought, reorganized, and/or renamed. New products were developed and commercialized and some already established ones were discontinued. Environmental issues such as toxicity of certain additives and of products of thermal decomposition of certain fluoropolymers etc. became quite important. Thus it was time to update the publication to include these changes and issues. As in the first edition, the second edition still stresses the practical aspects of fluoropolymers and their industrial application. Few illustrations were added and one of the major features is the addition of processing and engineering data of commercial products. In addition, the feedback from colleagues, students, clients, and attendants of various seminars and training sessions were helpful in preparing the manuscript of this updated and expanded edition. My thanks are due to Lindsey Hofmeister, who was very helpful and encouraging in the initial stage of the preparation of the manuscript, Dr. Sina Ebnesajjad of Fluoroconsultants, for valuable advice and encouragement, to Steve Mariconti for valuable comments and recommendations in the text, to Corinne Gangloff from Freedonia Group, and to Ray Will from SRI Consulting for valuable capacity and market data. A special credit is due to the team from CRC Press, particularly to David Fusel, Hilary Rowe, and Sylvia Wood for bringing this work to fruition. Jiri George Drobny Merrimack, New Hampshire, and Prague, Czech Republic, November 2007

xxi

Preface to the Third Edition The previous two editions of Technology of Fluoropolymers had the main goal of providing systematic fundamental information to professionals who are entering industrial practice in the fluoropolymer industry and to those who are already working in this field. We also hope to address people in other industries, such as the automotive, electrical and electronic, aerospace, medical, construction, chemical processing, and food processing as well as other groups, such as educators and students of chemistry, chemical engineering, electrical and electronic engineering, and material science. Since the publication of the second edition in 2009, the industry has grown greatly in size and changed in many ways. In order to meet the challenges of technology developments, new applications, and the entry of new practitioners, an industry professional and writer with decades of experience has joined the project. The goal was set to produce a new edition that would qualify as a concise handbook with a larger variety of topics and more depth than the previous two editions. Consequently, the coverage of the book was expanded by adding new chapters to a total of 20, separated into seven parts. Each of these parts covers a specific topic, namely: an overview of fluoropolymers; thermoplastic fluoropolymers; fluoroelastomers; fluoropolymer aqueous systems; the effects of temperature and other variables on fluoropolymers; and safety and sustainability. New illustrations have been added and additional new engineering data have been included to aid the reader. Some readers may require more in-depth knowledge in the future than this book covers. This serves as a gateway to finding more detailed references. We have sought to use and cite every trustworthy source of fluoropolymer information in the chapters of this book. Undoubtedly, we may have made inadvertent errors in the fulfilment of the ambitious goals of this book. A note indicating the specific error to the publisher, Taylor and Francis, for the purpose of correcting future editions would be much appreciated. We are most grateful to the many who have contributed to this book. Institutions, companies, and researchers whose works have been referred to have been cited to the best of our abilities. In spite of our diligent efforts some names may have been missed. For that, we offer our sincere apologies. J. G. Drobny S. Ebnesajjad, PhD November 2022

xxiii

About the Authors Jiri George Drobny is the president of Drobny Polymer Associates, an international consulting firm specializing in fluoropolymer science and technology, radiation processing, and elastomer technology. His career spans over 50 years in the polymer processing industry in Europe, the United States, and Canada, mainly in R&D with senior and executive responsibilities. Drobny is also active as an educator, author, and as a technical and scientific translator. He is a member of the Society of Plastic Engineers, the American Chemical Society (ACS), the Rubber Division of ACS, and RadTech International. He resides in New Hampshire in the United States. Dr. Sina Ebnesajjad retired from DuPont fluoropolymers in 2005 after 23 years of service and founded the FluoroConsultants Group, LLC in 2006. Sina was the series editor of the Plastics Design Library published by Elsevier from 2010 to 2021. He is author, editor, and co-author of over a dozen technical and data books including five handbooks on fluoropolymer technologies and applications. He is the author of multiple volumes on the surface preparation and adhesion of materials. He has been engaged in technical writing and publishing since 1974. His experience includes thermoplastic fluoropolymer technologies, including polymerization, finishing, fabrication, and failure analysis.

xxv

Part I

Overview of Fluoropolymers

1 Introduction Sina Ebnesajjad

People have become so accustomed to the use of plastics in their daily lives that one might think these materials have been around for centuries. Yet most key developments and scientific progress took place after the 1930s, when the word “polymer” joined the lexicon of technology and science terms. Nylon, Teflon®, Neoprene, Lucite®, Dacron®, Lexan®, Kevlar, Nomex®, and so on were new polymers born during those years and soon assumed vital roles in human life. Teflon® a trademark of the DuPont Co (now Chemours) referred to an unusual class of polymer generically called fluoropolymers. Fluoropolymers represent a specialized group of polymeric materials. Their chemistry is derived from the fluorocarbon compounds first developed for us as refrigerants. In the 1920s, significant efforts were made to develop nontoxic, inert, low boiling, liquid refrigerants mainly for reasons of safety and toxicity. The fluorine-based refrigerants, based on compounds of carbon, fluorine, and chlorine, quickly became a commercial success. Since their adoption in the 1930s as refrigerants fluorocarbon compounds have found applications such as fire retardants, foaming agents, aerosol propellants, and anesthesia agents. The serendipitous discovery of polytetrafluoroethylene (PTFE) by Roy Plunkett [1] in 1938 in the laboratories of E. I. du Pont de Nemours & Co. during the ongoing refrigerant research was the dawn of a new era. Until the end of the Second World War PTFE was used exclusively in the Manhattan Project for the construction of the atomic bomb because of its properties including resistance to nearly all chemicals. Wartime needs rescued Roy Plunkett’s discovery from oblivion. Thousands of applications have since been developed for fluoropolymers, impacting every facet of human life. PTFE was commercialized by the DuPont Company under the trademark of Teflon® in 1950. PTFE is basically a fully fluorinated analog of linear polyethylene on paper (Figure 1.1). Since the inception of PTFE, a large number of perfluorinated and partially fluorinated thermoplastic and elastomeric fluorine-containing polymers have been developed. Some are derivatives of the original PTFE; some contain other elements, such as chlorine, silicon, or nitrogen, and represent a sizable group of materials with a formidable industrial utility as seen from its growth rate since the 1940s (Figure 1.2). The factor determining the unique properties of fluoropolymers are the strong bonds between carbon and fluorine which shield the carbon backbone by fluorine atoms. Monomers for commercially important large-volume fluoropolymers are shown in Table 1.1. Those monomers can be combined to yield homopolymers, copolymers, and terpolymers. The resulting products range from rigid resins to elastomers with unique properties not achievable by any other polymeric materials. Several fluoropolymers have very high melting points, notably PTFE and perfluoroalkoxy (PFA) and fluorinated ethylene propylene (FEP) resins; perfluorinated polymers have excellent dielectrics, low coefficients of friction, stain resistance, and high resistance to common solvents and aggressive chemicals. In general the properties of fluoropolymers are a function of the fluorine content of their molecules (Table 1.2). Commercial fluoropolymers with the exception of PTFE and polyvinyl fluoride (PVF) are melt processible into films, sheets, profiles, and moldings using conventional manufacturing methods. PTFE is processed in alternative ways to fabricate all types of shapes and parts. PVF is processed by a plastisol method which involves the addition of a solvent to suppress its melting point. Fluoropolymers are widely used: in the chemical, automotive, electrical, and electronic industries; in aircraft and aerospace; in communications, construction, medical devices, special packaging, protective garments, and a variety of other DOI: 10.1201/9781003204275-2

3

4

Technology of Fluoropolymers

FIGURE 1.1

Molecular structure of polyethylene and polytetrafluoroethylene.

FIGURE 1.2

Growth rate of fluoropolymers during the decades since the 1940s (%).

TABLE 1.1 Monomers Used in Commercial Fluoropolymers Compound

Formula

Ethylene Tetrafluoroethylene Chlorotrifluoroethylene Vinylidene fluoride Vinyl fluoride Propene Hexafluoropropene Perfluoromethylvinyl ether Perfluoropropylvinylether

CH2 = CH2 CF2 = CF2 CF2 = CC1F CH2 = CF2 CFH = CH2 CH3CH = CH2 CF3CF = CF2 CF3OCF = CF2 CF3CF2CF2OCF = CF2

5

Introduction TABLE 1.2 Effect of Increase in the Fluorine Content of Fluoropolymers Property

Impact

Chemical resistance Melting point Coefficient of friction Thermal stability Dielectric constant Dissipation factor Volume and surface resistivity Mechanical properties Flame resistance Resistance to weathering Surface energy

Increases Increases Decreases Increases Decreases Decreases Increase Decrease Increases Increases Decreases

TABLE 1.3 Fluoropolymer Categories (LUMIFLON, CYTOP, and AFLAS are trademarks of AGC Chemicals) Phase

Resin Type

Partially Fluorinated

Perfluorinated

Crystalline

Thermoplastic resin

PTFE PFA FEP

Amorphous

Resin

ETFE PVDF PVF PCTFE LUMIFLON (FEVE) Copolymer of TFE and dioxole FKM AFLAS (FEPM)

Elastomer

CYTOP FFKM

Note: ETFE, copolymer of ethylene and tetrafluoroethylene; ECTFE, copolymer of ethylene chlorotrifluoroethylene; FEVE, fluorinated ethylene vinyl ether; MFA, copolymer of perfluoromethylvinylether and tetrafluorethylene; PFA, copolymer of perfluoropropylvinylether and tetrafluoroethylene; FEP, fluorinated ethylenepropylene copolymer; PVDF, poly(vinylidene fluoride).

industrial and consumer products. Classification of commercial fluoropolymers based on crystallinity is listed in Table 1.3. Figure 1.3 shows the chronological development of perfluorinated and partially fluorinated fluoropolymers. A list of current manufacturers of fluoropolymers can be found at the end of this chapter. The global fluoropolymers market is projected to grow from $7.23 billion in 2021 to $10–12 billion in 2028 at a compounded annual growth rate (CAGR) of 5.2–6.5% in the forecast period, 2021–2028. The global market experienced a 6% decline in 2020 from the average annual growth during the prior three years [2, 3]. Asia Pacific is expected to undergo the highest rate of usage growth of fluoropolymers during the rest of the 2020s (Figure 1.4). The future growth of fluoropolymers may be affected by the safety, health, and environmental issues associated with these products. A longer term factor is the development work focused on finding non-fluorinated alternatives to fluoropolymers. PTFE is the oldest product among the fluoropolymers, albeit after polychlorotrifluoroethylene which is a specialty resin because of its relatively inferior properties and high cost. Yet PTFE, over seven decades after its commercialization, has the highest consumption quantity (>50% globally) among all thermoplastic fluoropolymers (Figure 1.5). PVDF and FEP have the second and third highest consumptions. Both polymers especially PVDF have grown more rapidly than others in recent decades. PFA, in spite of its PTFE-like properties, has not grown rapidly because of its high price stemming from comonomer perfluoroalkyl vinyl ethers. The “Other” category in Figure 1.4 includes fluoroelastomers and specialty

6

Technology of Fluoropolymers

FIGURE 1.3 Chronological development of thermoplastic fluoropolymers and fluoroelastomers.

FIGURE 1.4 Projected growth of fluoropolymers in Asia Pacific ($ billions) [2].

fluorinated polymers. Little change has occurred over time in the distribution of the product usage because of the maturity of fluoropolymers. The main applications of thermoplastic fluoropolymers by consumption are shown in Figure 1.6. Electrical/electronics and automotive/aviation round out the top three consumers of fluoropolymers. A surprisingly high quantity of fluoropolymers is used in medical applications, some of which are permanent implants in human bodies. Industrial/chemical processing industries are the leading consumer of PTFE and other fluoropolymers because of the chemical resistance and high temperature properties of this group of resins. An amazing aspect of fluoropolymers is their longevity of use in industries. Over time some applications of these plastics have disappeared by the normal attrition process of technological and product

Introduction

7

FIGURE 1.5 World consumption of fluoropolymers by type [4].

FIGURE 1.6 The global high performance fluoropolymer market share by end use industry [5].

evolution. The unique characteristics and versatility of fluoropolymers have led to the development of new uses and parts. The latest growth of fluoropolymers has come in the areas of sustainability and clean energy. Solar cells and electric vehicles are two examples (more in Chapter 2) of new end uses for fluoropolymers. In the end it all comes down to the performance characteristics for which there are no viable alternatives: • • • • • • • •

Resistance to a wide variety of organic and inorganic chemicals. Does not support flame under atmospheric conditions. Weather resistance. Withstands elevated temperatures; the continuous use temperature of PTFE and PFA is 260°C. Low surface energy, thus non-wetting properties. Non-sticking and release properties. High-performance dielectric properties. Surfaces may be modified to allow adhesive bonding.

8

Technology of Fluoropolymers

Evolution fluoropolymers and their value to human society are discussed in Chapter 2. Basic chemistry, monomer synthesis methods, and polymerization/finishing of fluoropolymers are covered in Chapters 3 and 4. The properties of commercial products and fabrication processes of fluoropolymers are described in Chapters 5–7. The applications of commercial products are discussed in Chapter 8. Chapters 9–11 discuss commercial fluorocarbon-based elastomers. Fluoropolymer dispersions and their applications are the subjects of Chapters 12 and 13. Amorphous fluoropolymers, fluorinated polyurethanes, fluorinated ionomers, and fluoropolymer additives and their applications are covered in Chapters 14 and 15. The effects of temperature, environmental elements, and radiation are discussed in Chapters 16–18. Safety and sustainability topics are covered in Chapters 19 and 20.

Current Major Manufacturers of Fluoropolymers Manufacturer

Products

Arkema (www.arkemagroup.com) Asahi Glass Co. (www.agc.co.jp)

PCTFE, PVDF ETFE, FEP, PFA, FEVE, PVDF fluoroelastomers, PTFE, amorphous fluoropolymers, PTFE micropowders TPE EFEP, ETFE, FEP, PCTFE, PFA, PTFE, PTFE micropowders, fluorocarbon elastomers (FKM, fluorinated TPE), FKM latex Fluorosilicones ETFE, FEP, PFA, PTFE, amorphous fluoropolymer (AF), PTFE micropowders, PVF, fluorinated ionomers ETFE, FEP, HTE fluoroplastic, THV fluoroplastic, PTFE, PTFE micropowders, PFA, PVDF, fluorocarbon elastomers PCTFE PTFE, ETFE, FEP, PVDF, PTFE, modified PTFE fluorocarbon elastomers (FKM) PVDF

Central Glass Co., Ltd. (www.cgco.co.jp) Daikin Industries Ltd. (www.daikin.com) Dow Corning (www.dowcorning.com) Chemours Co (www.Chemours.com) Dyneon LLC (www.dyneon.com) Honeywell (www.honeywell.com) JSC Halogen (www.halogen.com) Kureha Chemical Industry Co. (www.kureha.co.jp) Momentive Performance Materials (www.momentive.com) Shandong Dongyue Chemical Co. (www.dongyuechem.com) Shin-Etsu Chemical Co., Ltd. (www.shinetsu.co.jp) Solvay Solexis S.p.A. (www.solvay.com)

Fluorosilicones PTFE Fluorosilicones ECTFE, MFA, PFA, PTFE, PTFE micropowders, PVDF, fluorocarbon elastomers (FKM, FFKM), FKM latex, ionomers

REFERENCES 1. Plunkett, R. J., U.S., Patent 2,230,654 to Kinetic Chemicals Inc. (1941). 2. Data from Fluoropolymers Market, Size, Share and Covid Impact Analysis, and Regional Forecast, 2021–2028, www.fortunebusinessinsights.com, (2022). 3. Fluoropolymer Market by Product Type, Application and End Use Industry, 2020–2027, Allied Market Research, www.alliedmarketresearch.com, (2022). 4. Data from Fluoropolymers, Chemical Economics Handbook, pub by HIS Markit, https://ihsmarkit.com, (2019). 5. Global High Performance Fluoropolymer Market information, MRFR/CnM/2885-HCR, pub by Market Research Future®, www.marketresearchfuture.com, (2021).

2 Societal Benefits of Fluoropolymers Sina Ebnesajjad

The title of this chapter may sound silly to anyone who works with materials or has knowledge of them or designs parts and devices in just about any industry. Yet the question is certain to be raised by many who may not know the extent of the role of this plastic family in 21st-century living standards. The title of this chapter could have easily been: Do the Fluoropolymers Still Matter in the 21st Century? The answer is a resounding yes as will become clear by a few examples other than everyone’s favorite of non-stick pots and pans. The most important applications of this plastic family are hidden from view. The descriptions of fluoropolymers’ characteristics and properties offered in this chapter are selective with no attempt at completeness. These plastics have been described to the extent required to answer the question posed by the title of this chapter. Readers can readily find detailed additional information by referring to the existing body of literature published about fluoropolymers [1–10].

2.1 Basic Fluoropolymer Properties Fluoropolymers possess a combination of properties for most of which no realistic alternatives have been found. Therefore, this polymer family finds use in new applications well into the 21st century. The key properties of fluoropolymers include: • • • • • • • •

High and low temperature resistance. Chemical resistance. Non-wetting properties. Non-sticking properties. High-performance dielectric properties. Flame resistance – limiting oxygen index (LOI) is 95%. Ultraviolet radiation resistance. Resistance to weather.

2.2 Examples of Fluoropolymer Applications The 2019 edition of Fluoropolymers: Chemical Economics Handbook [11] states: “Fluoropolymers are among the most useful modern materials, providing nonstick surfaces for cookware and industrial products, waterproofing surface treatments for clothing and other substrates, stain barriers for textiles, high-purity fluid handling” plumbing, “medical applications (e.g., vascular grafts), wire and cable insulation jackets, high-performance coatings for harsh environments, mar-free coatings for touch screen electronic devices, architectural and marine coating additives, back sheets for photovoltaic panels, films and membranes for technical, waterproof clothing, and industrial applications.”

DOI: 10.1201/9781003204275-3

9

10

Technology of Fluoropolymers

A few common examples of applications containing fluoropolymers with their specific applications are: • • • •

• • • • • •

Wire and cable insulation for the electrical/electronic, automotive, and aerospace fields. Aerospace, automotive, and industrial hoses. Medical devices and instruments. Whole fluoropolymer and fluoropolymer-lined vessels, pipes, valves, pumps, and fittings for fluid processing equipment for chemical, petroleum, environmental, and semiconductor applications. Polytetrafluoroethylene (PTFE) plumber’s tapes for water, liquid, and gas thread sealing. Breathable and water repellent textile microporous expanded PTFE membranes. Industrial fabrics and fibers for clothing, dental floss, and industrial/environmental applications, including laminates for industrial and automotive filtration. Lubricants for printing inks, including lubricity materials for mechanical joints and contact points in mechanisms. Cookware coatings. Mechanical, coating, and lubrication applications for vehicles, building construction, industrial machines, and appliances.

2.3 Automotive Applications Uses of fluoropolymers in internal combustion automobiles rely on several basic properties including high temperatures and chemical resistance, low-friction, and durability. Fluoropolymers have routinely been used in automobile fuel systems, power trains, brake systems, electrical systems, heat, ventilation, and air conditioning (HVAC) systems, chassis, and interiors. The ever-rising under-hood temperatures and requirements to prevent atmospheric emissions of fuel and other fluids can be accomplished quite efficiently using fluoropolymers. PTFE is used to insulate wires connected to oxygen sensors which are mounted in vehicle exhaust manifolds. PTFE is quite suitable for this hot environment by providing reliable dielectric protection for the wiring to ensure adequate control exhaust emissions. Ethylene tetrafluoroethylene copolymer (ETFE) is used to insulate wiring for other high-temperature locations near auto engines, and wiring exposed to hot hydraulic fluid within automatic transmissions. Resistance of ETFE to the permeation of fuel components is critical in applications in fuel tanks, filler necks, and fuel and vapor management hoses. These components allow compliance with strict emission regulations. One example is fuel hose components constructed from ETFE lined elastomers. In recent decades electric vehicles (EVs) have begun to replace internal combustion vehicles. Fluoropolymers have found applications in EVs for some of the reasons they have been used in conventional automobiles. EVs have a complex design and require special materials and parts. Even though they do not contain motor oil they require special lubricants because of the many moving parts in those vehicles. Fluoropolymers and fluorinated materials find use both in the drive train and interior of EVs. Polyvinylidene fluoride copolymers are used as the binder in lithium-ion batteries because of the corrosive internal environment of the battery. Battery gaskets are made from perfluoroalkoxy polymer (PFA) because it offers the ultimate thermal and chemical resistance in addition to low permeation [12].

2.4 Aerospace Wire and Cable Fluoropolymers are typically used in general hook-up wire, military, or high-temperature applications. Durability is the most desirable factor of these cables as they are able to survive in temperatures reaching up to 400°C, intermittently. Generally, fluoropolymers are used in applications that require heat

11

Societal Benefits of Fluoropolymers TABLE 2.1 A Partial List of Aircraft Open Wiring Constructions [13] Voltage Rating (Maximum)

Rated Wire Temperature (°C)

MIL-W-22759/1

600

200

MIL-W-22759/2

600

260

MIL-W-22759/3

600

260

MIL-W-22759/4

600

200

MIL-W-22759/5

600

200

MIL-W-22759/6

600

260

MIL-W-22759/7

600

200

MIL-W-22759/8

600

260

MIL-W-22759/9

1,000

200

MIL-W-22759/10

1,000

260

MIL-W-22759/13

600

135

MIL-W-22759/16

600

150

MIL-W-22759/17

600

150

MIL-W-22759/20

1,000

200

MIL-W-22759/21

1,000

260

MIL-W-22759/34

600

150

Document

Insulation Type Fluoropolymer insulated TFE and TFE coated glass Fluoropolymer insulated TFE and TFE coated glass Fluoropolymer insulated TFE-glass-TFE Fluoropolymer insulated TFE-glass-FEP Fluoropolymer insulated extruded TFE Fluoropolymer insulated extruded TFE Fluoropolymer insulated extruded TFE Fluoropolymer insulated extruded TFE Fluoropolymer insulated extruded TFE Fluoropolymer insulated extruded TFE Fluoropolymer insulated FEP PVF2 Fluoropolymer insulated extruded ETFE Fluoropolymer insulated extruded ETFE Fluoropolymer insulated extruded TFE Fluoropolymer insulated extruded TFE Fluoropolymer insulated crosslinked modified ETFE

Conductor Type Silver coated copper Nickel coated copper Nickel coated copper Silver coated copper Silver coated copper Nickel coated copper Silver coated copper Nickel coated copper Silver coated copper Nickel coated copper Tin coated copper Tin coated copper Silver coated high strength copper alloy Silver coated high strength copper alloy Nickel coated high strength copper alloy Tin coated copper

TFE = PTFE FEP = perfluorinated ethylene propylene copolymer. PVF2 = polyvinylidene fluoride. ETFE = ethylene tetrafluoroethylene copolymer.

resistance, corrosion resistance, and friction or wear resistance. Aerospace is considered a critical end use for obvious reasons. Different types of wire and cable connect a variety of systems, some critical, throughout the fuselage of civilian and military aircraft. Maximum operating temperature ratings vary anywhere from 150 to 260oC with short duration peaks approaching 300oC. An aircraft may experience low temperatures approaching −65oC resulting in wide range thermal cycling. Aircraft contain corrosive fluids such as hydraulic oils and jet fuel, thus requiring chemical resistant materials. The insulation material must also be flame resistant as required of other materials installed in airframes and which do not produce toxic fumes if ignited. This is why the installation of polyvinyl chloride insulation in aerospace applications has been banned since the 1990s, although there exist a few exceptions outside passenger planes. Tables 2.1 and 2.2 show lists of insulation materials for aerospace wire and cable in which the prevalence of fluoropolymers is clear.

12

Technology of Fluoropolymers

TABLE 2.2 A Partial List of Protected Aircraft Wiring Constructions [13] Voltage Rating (Maximum)

Rated Wire Temperature (°C)

MIL-W-22759/11

600

200

MIL-W-22759/12

600

260

MIL-W-22759/14

600

135

MIL-W-22759/15

600

135

MIL-W-22759/18

600

150

MIL-W-22759/19

600

150

MIL-W-22759/22

600

200

MIL-W-22759/23

600

260

MIL-W-22759/32

600

150

MIL-W-22759/33

600

200

MIL-W-22759/44

600

200

MIL-W-22759/45

600

200

MIL-W-22759/46

600

200

MIL-W-81044/12 MIL-W-81044/13

600 600

150 150

Fluoropolymer insulated extruded TFE Fluoropolymer insulated extruded TFE Fluoropolymer insulated FEP-PVF2 Fluoropolymer insulated FEP-PVF2 Fluoropolymer insulated extruded ETFE Fluoropolymer insulated extruded ETFE Fluoropolymer insulated extruded TFE Fluoropolymer insulated extruded TFE Fluoropolymer insulated crosslinked modified ETFE Fluoropolymer insulated crosslinked modified ETFE Fluoropolymer insulated crosslinked modified ETFE Fluoropolymer insulated crosslinked modified ETFE Fluoropolymer insulated crosslinked modified ETFE Crosslinked polyalkene - PVF2 Crosslinked polyalkene - PVF2

MIL-W-81381/17 MIL-W-81381/18

600 600

200 200

Fluorocarbon polyimide Fluorocarbon polyimide

Document

Insulation Type

Conductor Type Silver coated copper Nickel coated copper Tin coated copper Silver plated high strength copper alloy Tin coated copper Silver coated high strength copper alloy Silver coated high strength copper alloy Nickel coated high strength copper alloy Tin coated copper Silver coated high strength copper alloy Silver coated copper Nickel coated copper Nickel coated high strength copper alloy Tin coated copper Silver coated high strength copper alloy Silver coated copper Nickel coated copper

TFE = PTFE FEP = perfluorinated ethylene propylene copolymer. PVF2 = polyvinylidene fluoride. ETFE = ethylene tetrafluoroethylene copolymer.

2.5 Aircraft Fuel Hoses All powered aircraft, civilian and military, require fuel on board to operate the engines. A fuel system consisting of storage tanks, pumps, filters, valves, fuel lines, metering devices, and monitoring devices is designed and certified under the strict Title 14 of the Code of Federal Regulations (14 CFR) guidelines. Each system must provide an uninterrupted flow of contaminant-free fuel regardless of the aircraft’s altitude. One of the components of the fuel system is flexible lines that consist of steel or polyaramid (e.g., Kevlar® by DuPont Co.) braided fluoropolymer-lined hoses. Flexible hoses, often rubber-lined, are used in areas where vibration exists between components, such as between the engine and the aircraft structure. The fire resistant PTFE lined hose in Figure 2.1 is unaffected by any known fuel, petroleum, or synthetic base oils, alcohol, coolants, or solvents commonly used in aircraft. PTFE hose has the distinct advantages of practically unlimited storage time, a greater operating temperature range, and broad usage (hydraulics, fuel, oil, coolant, water, alcohol, and pneumatic systems). Medium-pressure PTFE hose

Societal Benefits of Fluoropolymers

13

FIGURE 2.1 Example of the design of a fire resistant PTFE-lined hose for aerospace applications [15].

assemblies are sometimes preformed to clear obstructions and to make connections using the shortest possible hose length. Since preforming permits tighter bends that eliminate the need for special elbows, preformed hose assemblies save space and weight [14].

2.6 Heart Rhythm Management: The Implantable Cardioverter Defibrillator Figures 2.2 shows an example of an implantable cardioverter defibrillator (ICD), an important medical device. This is a small, battery-powered device placed under the skin that holds a tiny computer. If an abnormal rapid heart rhythm is detected the device will deliver an electric shock to restore a normal heartbeat. It is implanted in the body to watch for and treat abnormal heart rhythms. Newer-generation ICDs may have a dual function which also includes the ability to serve as a pacemaker. The pacemaker feature stimulates the heart to beat faster if the heart rate is detected to be too slow. It can detect and treat both fast and slow heart rhythms. In other words, an ICD acts as both a pace maker and a defibrillator. Typically, the battery lasts up to ten years during which time an average human heart beats about 400 million times. ICDs have been very useful in preventing sudden death in patients with known, sustained, ventricular tachycardia or fibrillation. Studies have shown that they may have a role in preventing cardiac arrest in high-risk patients who have not had, but are at risk of, life-threatening ventricular arrhythmias.

FIGURE 2.2 An example of an implantable cardioverter device in the human body [16].

14

FIGURE 2.3

Technology of Fluoropolymers

Cross-section of the lead of a typical implantable cardioverter defibrillator.

An important part of ICD is the lead body. This must also withstand the human body’s in vivo chemistry, which is surprisingly harsh. It must also withstand flex action generated by the heart beat motion, requiring the insulation to possess significant flex fatigue resistance. This operation of the ICD subjects the insulation to significant voltage (Figure 2.3). ETFE and PTFE are both biocompatible and provide adequate dielectric strength for the lead to continue to function normally throughout the life of the ICD. Moreover, ETFE is abrasion resistant and has proven resilient to allow high voltage therapy (as high as 900 V). Another important medical device is the guide catheter in which PTFE and other fluoropolymers play an important role. The lubricity of PTFE allows ease of movement of the guidewire. This is a catheter that makes it easier to enter a vessel with other devices or instruments. Guide catheters are used to facilitate the placement of lasers, stents, and balloons for angioplasty [17]. Catheters allow easy, atraumatic access to areas of the vasculature that are otherwise difficult to access. Steerable guide catheters are constructed with components that are selected to provide optimal navigability, torque transfer, and push-ability for a variety of typical percutaneous access routes. The catheter wall thickness in the deflecting segment of the guide catheter is about ⅓ mm or less, and includes a slotted deflection tube. This construction allows a very tight turning radius (Figure 2.4).

2.7 Pediatric Heart Repair Some children are born with congenital heart defects which must be repaired by corrective surgical fixes. A baby born with one or more heart defects has a congenital heart disease(s). Surgery is often needed when the defect could harm the child's long-term health [19]. For example, coarctation of the aorta occurs when a part of the aorta has a very narrow section (Figure 2.5). The shape looks like an hourglass timer. The narrowing makes it difficult for blood to get through to the lower extremities. This leads to very high blood pressure before the point of coarctation and low blood pressure beyond the point of coarctation. The most common way to repair it is to cut the narrow section and make it bigger by using a patch made of expanded PTFE which is a synthetic material [9].

Societal Benefits of Fluoropolymers

15

FIGURE 2.4 Construction design of a steerable guide catheter [18].

FIGURE 2.5 Depiction of pediatric coarctation of the aorta [20].

2.8 Thread Sealant An everyday example of the usefulness of fluoropolymers is ordinary thread sealant tape (Figure 2.6). Tape for thread sealant utilizes the outstanding properties of PTFE to ensure long-term, highly reliable service plus easy disassembly. The tape provides permanently sealed joints, which will outlast the pipe under practically all service conditions. The tape can be used with all types of pipe including steel, iron, galvanized, aluminum, brass, exotic metals, Monel®, plastic, and even rubber. The advantage of PTFE tape is the ease of its use and safety. It does not contain any chemicals that may cause exposure as compared to pipe dopes used for thread sealing in the past. It is also easy to remove to reseal a pipe. In the case of pipe dope or plumber’s putty, cleaning of the seals is required before resealing.

16

FIGURE 2.6

Technology of Fluoropolymers

PTFE thread sealant tape as applied to a pipe thread.

2.9 Chemical Processing Industry-lined Pipes, Fittings, and Vessels In the chemical process industry, manufacturing is usually carried out with chemically aggressive fluids. A major capital cost item in those factories includes the expenses of pipes, fittings, and vessels (Figures 2.7–2.9). If the chemicals are aggressive to the point of corroding carbon steel, then more expensive metals including stainless steel and exotic metals must be considered. The cost of moving to stainless steel and higher alloys is prohibitively high thus requiring a more economical solution. Contamination of process streams by corrosion by-products or ions from metallic equipment is detrimental to most processes and products. Increasing the resistance of equipment to corrosion is highly

FIGURE 2.7 Examples of fluoropolymer-lined fittings and linings.

Societal Benefits of Fluoropolymers

17

FIGURE 2.8 A fluoropolymer-lined pipe.

FIGURE 2.9 Convoluted and smooth-bore PTFE-lined braided hoses for fluid transfer.

beneficial because it extends service life and cuts unscheduled downtime. Modified PTFE, PFA and, perfluoromethylvinyl ether and tetrafluoroethylene copolymer (MFA) are quite resistant to permeation, and form smooth surfaces thus preventing surface build up and release of particles. Fluoropolymers have found major applications in chemical processing equipment as liners as well as parts to prevent corrosion and maintain purity. Even though fluoropolymers may increase the initial equipment cost, lifetime costs can be reduced, allowing manufacturers to be more competitive.

18

Technology of Fluoropolymers

Severe services such as hydrogen fluoride processing have been made possible by lining carbon steel components with PTFE, modified PTFE, or perfluoroalkoxy polymers (PFA and MFA).

2.10 Semiconductor Chip Fabrication Our lives have been, and continue to be, revolutionized by electronics that impact the way we work, treat patients, communicate, shop, travel, bank, and learn. The driving force of these changes has been the semiconductor manufacturing industry (semicon). It has renewed itself rapidly by improving the state of technology and reducing the cost of its products. Historically, nearly every two years (Moore’s Law) there has been a step change toward smaller, faster, and less costly semiconductor devices (chips) [3]. From the beginning, the semiconductor industry has relied on polymers for the containment and supply of ultrapure water (UPW), acids, bases, oxidizers, aqueous salt solutions, and solvents. Growth of the semicon industry has relied on fluoropolymers as the material of construction and liner for critical components (Figure 2.10). Examples of fluoropolymer uses include bulk chemical systems, fluid transport and distribution systems, chemical mechanical polishing equipment, wet processing and etching equipment, tanks and containers, piping, and wafer handling and carrying tools. Suppliers of high-purity chemicals to semicon fabrication factories (fabs) also use fluoropolymer components for process surfaces in manufacturing equipment. The growth in the semicon industry has relied on the advancement of the manufacturing of silicon chip fabs, each of which can easily exceed $2 billion in capital investment. Precision of assembly, contamination control (purity), automation, and speed are some of the key contributing factors for the improved productivity of fabs. Consequently, over the decades every year more computation power has been packed into smaller processors, shrinking device sizes and lowering costs to consumers [3]. Fluoropolymers have had an outsized role in the success of the semicon industry. Some of the benefits of fluoropolymer use in the semicon industry and the places in which fluoropolymers are used are: Benefits: • Maximizing yields by reducing contamination. • Maximizing design freedom. • Minimizing cost of ownership. Use of fluoropolymers in fabs: • Bulk chemical systems. • Cleaning and etching.

FIGURE 2.10 High-purity fluid handling valves made from PFA and other fluoropolymers.

Societal Benefits of Fluoropolymers

19

• Chemical mechanical planarization. • Analyses of process fluid composition. • High-purity chemical manufacturing.

2.11 Biomedical Applications PTFE and other fluoropolymers have found use in medical applications for nearly a half-century. PTFE is the dominant fluoropolymer in biomedical devices and implant applications. Medical devices utilize these polymers in enabling parts, temporary implants, and permanent grafts. In spite of its inertness, the PTFE surface may be modified to change it from hydrophobic to hydrophilic. The versatility of PTFE has allowed the development of microporous membranes (ePTFE) with innumerable industrial and biomedical applications [9]. Chemical functional groups can be grafted to a PTFE surface to achieve characteristics such as hydrophilicity and non-thrombogenicity to prevent blood clot formation on the surface where grafts are exposed to blood. Proteins have complex chemical structures and can interact with a PTFE surface hydrophobically which is beneficial in many applications. For applications where cell growth in the pores of ePTFE membranes is beneficial, technology has been developed to modify its surface architecture and chemistry to enhance growth.

2.12 PTFE Micropowders PTFE micropowders, also referred to as fluoroadditives, are homopolymer grades of PTFE with a considerably lower molecular weight than standard PTFE [21]. They are produced either by controlled suspension or dispersion polymerization to a lower molecular weight [2, 22] or by degradation of PTFE (often scrap) by thermal cracking (pyrolysis) or by irradiation by a high-energy electron beam (EB). The EB process is the most widely used commercial method. Micropowders are white, free-flowing powders with very small particle size (typically in the range 2–20 μm). They have different particle shapes and morphology from those of granular and fine powder grades of PTFE. The molecular weight of micropowders is in the range 104 to 105 compared with that of standard PTFE, which is typically in the range 106 to 107. The melt viscosity of micropowders ranges from 102 to 105 poise, considerably lower than the typical values of standard PTFE of 109 to 1011. They are used predominantly as additives to lubricants to improve their performance and to plastics and rubber to reduce their coefficient of friction, and as additives to printing inks and coatings to reduce their nonstick properties [2].

2.13 Applications of Fluoroelastomers in Transportation Fluorocarbon elastomers, commonly known as FKMs, are a key component in industries that are exposed to harsh chemical conditions, ozone attacks, and intense temperatures [10]. FKMs can handle environments from as low as −40°C to as high as 250°C – or higher for short periods of time. FKMs contain a high ratio of fluorine to hydrogen content which gives them an extraordinarily strong resistance to a wide range of industrial chemicals including acids, steam, methanol, petroleum-based and silicone oils, diesel fuels, and other highly polar fluids. Advancements in gas turbine engines are pushing fluoroelastomers to their thermal limits. As vehicles, aircraft, and ships become more powerful and energy efficient they require durable components that are more reliable, operate safely, and last longer. FKM polymers provide a solution to both the aerospace and automobile industries and are also used to build high-performance machinery that require premium quality parts to provide stability in high endurance conditions. FKM compounds typically range from 55 to 90 durometers [23]. Typical uses for FKMs in the aeronautical industry include O-rings, gaskets, shafts, fuel hoses, joints, and other electrical connector components that are subjected to intense temperatures and pressure changes

20

Technology of Fluoropolymers

during flights. In the automotive industry, FKM synthetic rubbers help power high-performance engines that combine oil and chemicals with high temperatures.

2.14 Properties of Thermoplastic Fluoropolymers Some of the industrially useful properties of fluoropolymers include a high melting point, high thermal stability at extremely low and high temperatures, insolubility in solvents, chemical inertness, a low coefficient of friction, a low dielectric constant/dissipation factor, low water absorptivity, excellent weatherability and ultraviolet light resistance, and combustion resistance. The vast majority of the properties of fluoropolymers are superior to those of the hydrocarbon-based polymers. Through the decades a large family of fluorinated polymers has been developed leading to a revolution in human life in the 20th and 21st centuries. Chemical resistant pipes and tubes, transportation parts, comfortable apparel, semiconductor fabs, stadium roofs, vascular grafts, space lab parts, ultra chemical resistant rubbers, and many others have been made possible by fluoropolymers. Fluoropolymer plastics have replaced untold quantities of metals.

2.15 Delving Deeper into Properties Table 2.3 shows some of the observed changes in the properties of hydrocarbon-based polymers as a result of increased F substation. Fully fluorinated polymers such as PTFE, PFA, and fluorinated ethylene propylene copolymer (FEP) possess the ultimate properties of fluoropolymers. The impact of complete fluorine substitution for hydrogen atoms, on the properties of polyethylene, is considerable (Table 2.4). Some of the conclusions that can be derived from the comparison of polyethylene and PTFE properties in Table 2.4 are: • • • •

PTFE is one of the lowest surface energy polymers. PTFE is the most chemically resistant polymer. PTFE is one of the most thermally stable polymers. The melting point and specific gravity of PTFE are more than double those of polyethylene.

To summarize, fluoropolymer resins are essentially chemically inert. In the case of perfluorinated polymers resistance lasts to the upper-use temperature (260°C for PTFE and PFA). Very few chemicals are known to chemically react with those resins, that is, molten alkali metals and gaseous fluorine; and a few

TABLE 2.3 Typical Effect of Increase in the Fluorine Content of Polymers [2] Property

Impact

Chemical resistance Melt temperature Coefficient of friction Thermal stability Dielectric constant Dissipation factor Volume and surface resistivity Mechanical property Flame resistance Resistance to weathering Surface energy

Increases Increases Decreases Increases Decreases Decreases Increases Decreases Increases Increases Decreases

21

Societal Benefits of Fluoropolymers

TABLE 2.4 A Comparison of PTFE and Polyethylene (PE) Properties [24–26] Property

Polyethylene

PTFE

Specific gravity Melt temperature (OC) Dynamic coefficient of friction Critical surface energy (dynes/cm) Refractive index Propensity to chain branching Decomposition temperature (OC)

>2 First: 342; second: 327 0.33 33 1.51 Yes 330

~1 0.04 18 1.35 No 450

TABLE 2.5 Comparison of Select Properties of Commercial Fluoropolymers Property

PTFE

FEP

ETFE

PFA

PVDF THV

Specific gravity Melting point (2nd) (°C) Tensile strength (MPa) Elongation (%) Flexural modulus (MPa) Temperature rating (°C) Dielectric constant Coefficient of friction Cut-through (kg) Chemical resistance

2.15 327 20 300 560 260 2.1 0.1 4.5 Excellent

2.15 260 20 300 650 200 2.1 0.2 4.5 Excellent

1.70 270 40 200 1,100 150 2.6 0.4 18 Very good

2.15 310 28 300 650 260 2.1 0.2 4.5 Excellent

1.77 162 50 150 2,000 120 6.0 — — Good

1.97 115–180 23 500 80–210 Various 4.0 — — Good

FEP = perfluorinated ethylene propylene copolymer. ETFE = ethylene tetrafluoroethylene copolymer. PFA = perfluoroalkoxy polymer. PVDF = polyvinylidene fluoride. THV = tetrafluoroethylene hexafluoropropylene vinylidene fluoride terpolymer.

fluorochemicals, such as chlorine trifluoride, ClF3, or oxygen difluoride, OF2, which readily liberate free fluorine at elevated temperatures [27] (Table 2.5). The unique degree of the inertness of fluoropolymers reflects their chemical structure. Molecules of perfluorinated resins are formed simply from strong carbon–carbon and super-strong carbon–fluorine bonds; moreover, the fluorine atoms form a protective sheath around the carbon core of each molecule. This structure also produces other special properties, such as insolubility and low-surface adherability and friction. To a minor degree fluoropolymer resins may absorb halogenated organic chemicals. This will cause a very small weight change and in some cases slight swelling. If absorption is very high, it usually indicates a fabricated part of high porosity. Partially fluorinated fluoropolymers retain some or most of the properties of perfluorinated resins mostly depending on fluorine. These polymers present advantages over the perfluorinated resins including higher mechanical properties such as cut-through resistance in wire and cable, lower melting points, and ease of processability into complex shapes. Even though they are invisible to the eyes, because of playing functional roles as opposed to decorative ones, fluoropolymers play a critical part in the lives of people in the 21st century. It is surprising for an industry that has been in existence since the late 1940s that it continues to generate large numbers of new applications. There are, however, trends in the new products of the 21st century. Traditional uses of fluoropolymers such as lined pipe and vessel lining consume large quantities of resin. These applications continue in basic industries. Resin and part manufacturing continue their migration to developing economies, especially China, India, Mexico, and Vietnam.

22

Technology of Fluoropolymers

New applications typically consume smaller quantities of resins. They are often material for the construction of a component in complex designs such as electronic and medical devices. Another trend is the desire to apply fluoropolymer coatings to surfaces or impart fluoropolymer-like properties on the surfaces of parts. The savings are significant when surface functionality is sufficient to meet the end use.

2.16 Forces Affecting the Fluoropolymer Industries In spite of the incredible value fluoropolymers bring to raising everyday living standards they are subject to global market forces. To be sure we are not speaking of the industrial impact of the pandemic caused by the novel coronavirus SARS-CoV-2, commonly known as “COVID-19.” Some of the major factors bringing about changes in the fluoropolymer industries include: (1) environmental and health concerns; (2) the need to improve the sustainability of products; (3) globalization of businesses including manufacturing and consumption; and (4) the transition of legacy companies out of traditional fluoropolymers and the entry of new players. These drivers have shaken the relatively old fluoropolymer industries. The long term fate and shape of those industries remain to be defined over the next decades. There is no escaping from the realities of global warming, the risks presented by emissions to people and ecosystems, and the increasing regulations of plastics, including fluoropolymers. Another factor is the exhaustion of key ingredients of fluoropolymers that could result in cost increases in addition to commercial trade frictions among countries. These forces are but certain to compel the fluoropolymer industries to reconsider their business models and rethink the entire value chain. To cite an example, a generation ago biobased polymers mostly existed on drawing boards, in journal articles, and in books. In recent years they have begun to become a reality by starting to replace petroleum-based polymers in many applications.

REFERENCES 1. Scheirs, J., Modern Fluoropolymers: High Performance Polymers for Diverse Applications, Wiley, New York, (1997). 2. Ebnesajjad, S., Fluoroplastics Handbook: Non-melt Processible Fluoropolymers, vol 1, 2nd ed, Elsevier, Oxford, UK, (2015). 3. Ebnesajjad, S., Fluoroplastics Handbook: Melt Processible Fluoropolymers, vol 2, 2nd ed, Elsevier, Oxford, UK, (2015). 4. Ebnesajjad, S., Polyvinyl Fluoride Technology and Applications of PVF. 1st ed. Elsevier, Oxford, UK, (2012). 5. Ebnesajjad, S. Introduction to Fluoropolymers - Materials, Technology and Applications. 2nd ed. Elsevier, Oxford, UK, (2020). 6. Drobny, J. G. J. G. Technology of Fluoropolymers, 2nd ed., CRC Press, Boca Raton Fl, (2009). 7. Smith, D. W., Iacono, S. T., Iyer, S. S., Handbook of Fluoropolymer Science and Technology, Wiley, New York, (2014). 8. Banerjee, S., Handbook of Specialty Fluorinated Polymers, Preparation, Properties, and Applications, 1st ed, Elsevier, Oxford, UK. 9. Ebnesajjad, S., Expanded PTFE (ePTFE) Applications Handbook, Technology, Manufacturing and Applications, 1st ed, Elsevier, Oxford, UK, (2016). 10. Drobny, J. G., Fluoroelastomers Handbook, 2 nd ed, Elsevier, Oxford, UK, (2016). 11. Fluoropolymers, Chemical Economics Handbook, pub by HIS Markit, https://ihsmarkit.com, April (2019). 12. Daikin Industries, www.daikinchemicals.com/solutions/industries/automotive.html, December 15, (2021). 13. Advisory Circular AC 43.13-1B, CHAPTER 11, Aircraft Electrical Systems, United States Federal Aviation Administration, September 8, (1998). 14. Fluid Lines and Fittings, Chapter 7, Aviation Maintenance Technician Handbook – General, United States Federal Aviation Administration, www.faa.gov, (2008).

Societal Benefits of Fluoropolymers

23

15. US Patent Application US20120125470, Nanney, S., Ramaswamy, N, Stroempl, P. J., assigned to Parker Corp, May 24, (2012). 16. Implantable cardioverter-defibrillator, https://medlineplus.gov/ency/article/007370.htm, MedlinePlus, National Library of Medicine, Dep Health and Human Services, USA, May (2022). 17. Medical Dictionary, https://medical-dictionary.thefreedictionary.com, May (2022). 18. US Patent 8,939,960, Rosenman, D., Kayser, D., et al, assigned to Bio Cardia, Jan. 27, (2015). 19. Congenital heart defect - corrective surgery, https://medlineplus.gov/ency/article/002948.htm, MedlinePlus, National Library of Medicine, Dep Health and Human Services, USA, (May 2022). 20. Congenital heart defect, Coarctation of Aorta, https://medlineplus.gov/ency/article/000191.htm, MedlinePlus, National Library of Medicine, Dep Health and Human Services, USA, May (2022). 21. Ebnesajjad, S. and Morgan, R., Fluoropolymer Additives, 2nd Ed, Elsevier, Oxford, UK, (2019). 22. U.S. Patent 5,641,571, Mayer, L., Tonnes, K.-U., Bladel, H., Hoechst, A.G., June 14, (1997). 23. Northern Engineering Sheffield, UK, www.nes-ips.com, December (2021). 24. Chambers, R. D. Fluorine in Organic Chemistry, 1st ed. New York: John Wiley and Sons; (1973). 25. Hudlicky, M., Chemistry of Fluorine Compounds. 1st ed. New York: The McMillan Company; (1962). 26. Van Krevelen, D. W.. Properties of Polymers: Their Estimation and Correlation with Chemical Structure. 2nd ed. Amsterdam: Elsevier; (1976). 27. Properties Handbook No. H-37051-3. Teflon® PTFE fluoropolymers resin Published by DuPont; July (1996).

Part II

Thermoplastic Fluoropolymers

3 Synthesis and Properties of Monomers of Thermoplastic Fluoropolymers Sina Ebnesajjad

Today it is hard to imagine a world in which automobiles did not have reliable air conditioning systems. There was once such a world before the 1930s. The growing use of automobiles requires air conditioning to make travel bearable in hot weather especially in hot and humid climates. The existing refrigerants such as ammonia were toxic, flammable, and inefficient. In 1928, Freon®, a chlorofluorocarbon, was invented. In 1930, General Motors and DuPont formed the Kinetic Chemical Company to produce Freon. Roy Plunket discovered polytetrafluoroethylene (PTFE) while working on tetrafluoroethylene for the development of new fluorocarbon refrigerants. The story of the discovery has been told and retold often [1, 2]. The most fortunate and indeed miraculous event was tetrafluoroethylene which, in spite of being highly flammable and explosive, did not cause a disaster. Thus, tetrafluoroethylene became the first monomer for manufacturing fluoropolymers. Commercially significant thermoplastic fluoropolymers include PTFE, perfluoroalkoxy polymer (PFA), fluorinated ethylene propylene polymer (FEP), ethylene-tetrafluoroethylene copolymer (ETFE), ethylene-chlorotrifluoroethylene copolymer (ECTFE), polychlorotrifluoroethylene (PCTFE), polyvinylidene fluoride (PVDF), and polyvinyl fluoride (PVF). This chapter describes the important preparation methods and properties of monomers used in the synthesis of thermoplastic fluoropolymers.

3.1 Preparation of Tetrafluoroethylene There is some controversy over the first synthesis of tetrafluoroethylene (TFE; CAS # 116-14-3, CF2=CF2). Articles published in the last decade of the 19th century describe a number of efforts to prepare TFE via the direct fluorination of carbon and chloromethanes. Various papers reported the fluorination of tetrachloroethylene using silver fluoride [3–5]. Humiston reported the first documented preparation of TFE in 1919 but his invention has been disputed because of the errors in the TFE property data [6]. The first complete and definitive preparation of TFE was reported by Ruff and Bretachneider in 1933 [7]. Commercially, TFE is prepared by the pyrolysis of chlorodifluoromethane (CHClF2), also known as HCFC-22, by which a molecule of HCl is removed, and a reaction of the degradation products [8]. Two CF2 free radicals produced by dehydrochlorination of HCFC-22 combine, yielding C2F4 molecules. The synthesis process begins with the reaction of the fluorine ore fluorspar with an acid, usually sulfuric acid. The reaction yields highly reactive hydrofluoric acid (HF). HF is reacted with halogenated aliphatic hydrocarbons where halogen exchange in favor of fluorine results in hydrochlorofluorocarbons. Dehydrohalogenation allows the formation of fluorocarbons. The entire chain of reactions in a fully integrated commercial TFE manufacturing operation is shown here. Fluorspar (CaF2), sulfuric acid, and chloroform are the starting ingredients for the production of chlorodifluoromethane, also called difluorochloromethane, for the introduction of fluorine into an organic

DOI: 10.1201/9781003204275-5

27

28

Technology of Fluoropolymers

reaction sequence [9–15]. The conventional reaction scheme for the synthesis of tetrafluoroethylene from fluorspar is: HF formation: CaF2 + H2SO4 ➔ 2HF + CaSO4

(3.1)

CH4 + 3 Cl2 ➔ CHCl3 + 3 HCl

(3.2)

Chloroform formation:

Chlorodifluoromethane (HCFC-22) preparation: CHCl3 + 2 HF ➔ CHClF2 + 2 HCl

(3.3)

2 CHClF2 ➔ 2CF2: + 2 HCl

(3.4)

2CF2: ➔ CF2=CF2 (tetrafluoroethylene)

(3.5)

(SbF3 catalyst) TFE synthesis:

(pyrolysis)

The overall pyrolysis reaction is: 2 CHClF2 ➔CF2=CF2 + 2 HCl (an equilibrium reaction)

(3.6)

Some by-products are also produced during the pyrolysis of HCFC-22. They include hexafluoropropylene (HFP), perfluorocyclobutane and octa-fluoroisobutylene, 1-chloro-1,1,2,2-tetrafluoroethane, 2-chloro-1,1,1,2,3,3-hexafluoropropane, and a small amount of highly toxic perfluoroisobutylene. The type and the amount of by-products, also called high boilers, depend on the reaction conditions because both Equations (3.4 and 3.5) are equilibrium reactions. Steam has been used to minimize the HFP by-product. By holding the steam to CHClF2 in the range of 7: 1 to 10:1 yields approaching 95% can be obtained at an 80% chlorodifluoromethane conversion. The TFE kinetics of the pyrolysis of chlorodifluoromethane have been studied by Chinoy and Sunavala. They concluded that operating the pyrolysis reaction at above 850–900°C is effective by maximizing the conversion of chlorodifluoromethane, minimizing the hexafluoropropylene content, and maximizing the TFE yield [16]. All traces of telogenic hydrogen or chlorine-bearing impurities must be removed from the reaction mixture because the polymerization of TFE to high molecular weights requires extreme purity. Commonly TFE is purified to 99.99995%. Trifluoroethylene is a powerful chain transfer agent and must be reduced to less than 0.2−0.3 parts per million of TFE. Separation of TFE begins with the cooling of pyrolysis products, followed by scrubbing with a dilute basic solution to remove HCl, then dried. The gas is then compressed and distilled to recover the unreacted CHClF2 for recycling and recovering high purity TFE [17]. The production of TFE requires the generation of a reactive fluorinated carbon fragment, difluorocarbene (:CF2). Upon quenching, difluorocarbenes may dimerize to produce TFE (C2F4). Hence, it is important for the processes that generate :CF2 to operate in good yields at comparatively low temperatures to reduce energy consumption as well as reduce TFE production costs. To increase the yield of TFE new processes have been developed that lead to the formation of :CF2, the TFE precursor, in good yields [18]. The largest consumption of TFE is for polymerization into a variety of PTFE homopolymers, modified PTFE, and micropowders, and as a comonomer in copolymerization with hexafluoropropylene, ethylene, perfluorinated ether, and other monomers, and also as a comonomer in a variety of terpolymers. Other uses of TFE are to prepare low-molecular-weight polyfluorocarbons and carbonyl fluoride oils as well as

Synthesis and Properties of Monomers

29

to form PTFE in situ on metal surfaces [19] and in the synthesis of hexafluoropropylene, perfluorinated ethers, and other oligomers [20].

3.2 Properties of Tetrafluoroethylene TFE is a colorless, tasteless, odorless, and nontoxic gas that is highly flammable in addition to being explosive in the absence and presence of oxygen [21]. Some of the important properties of TFE are listed in Table 3.1. It is stored as a liquid (its vapor pressure at –20°C is 1 MPa) and is polymerized usually above its critical temperature and critical pressure. A TFE polymerization reaction is highly exothermic, requiring the removal of heat from the reaction medium to ensure a safe and controlled process. TFE is a highly reactive compound that appears as a gas at room temperature (20°C). Under sufficient pressure it can be liquified in a container allowing availability of large quantities of this monomer for polymerization. TFE is stored or transported as a liquid in the presence of an inhibitor such as d-limonene. The inhibitor prevents auto-polymerization of TFE which can take place in the presence of small amounts of oxygen or other agents. Oxygen can result in the auto-polymerization of TFE, which can in turn cause sufficient localized heating within the container to cause the TFE vapor above the liquid within the container to explode [24]. The explosivity of TFE may not depend on the presence of air, however, since air will normally be excluded (purged) from the container of liquid TFE. Even in the absence of air, exposure of the TFE vapor within the container to a spark, such as caused by the discharge of static electricity, a hot metal surface, such as is caused by metal surfaces rubbing together, or an external fire, can cause the TFE vapor to explode. Thus, for example, a saturated TFE vapor can explode at a temperature of −16°C or greater when it is under a pressure of at least 1.032 MPa. In contrast an unsaturated TFE vapor can explode at 25°C and 0.79 MPa. A mixture of air and TFE are flammable when exposed to an ignition source such as a hot surface (240°C or higher) even under atmospheric pressure. The most dangerous characteristic of TFE, however, is its ability to degrade explosively in the absence of any oxidizing agent. Typically, TFE is most susceptible to degradation while vaporizing from a pressurized liquid state. TFE decomposition called “deflagration” yields tetrafluoromethane (CF4) and carbon. The susceptibility to explosion increases with increasing pressure and temperature. Deflagration is highly exothermic, generating 57–62 kcal/mole at 25°C and 1 atm [25], about the amount of heat released by the explosion of black gun powder. Typically, because of transportation concerns, TFE manufacturing and polymerization are conducted at the same location. The problem of TFE explosivity during transportation has been solved by adding an inhibitor such as hydrochloric acid and terpenes, α -pinene, terpene B, and d-limonene, which appear to scavenge oxygen, a polymerization initiator [25]. Commercially, HCl is added to the liquid TFE within the pressurized TABLE 3.1 Properties of Tetrafluoroethylene [22, 23] Property

Value

CAS No. Molecular weight Boiling point at 101.3 kPa, °C Boiling point, °C Critical temperature, °C Critical pressure, MPa Critical density, g/ml Heat of formation for ideal gas at 25°C, ∆H, kJ/mol Heat of polymerization to solid polymer at 25°C, ∆H, kJ/mol Flammability limits in air at 101.3 kPa, volume%

116-14-3 100.02 −76.3 −142.5 33.3 39.2 0.58 −635.5 −172.0 14–43

30

Technology of Fluoropolymers

container, the proportion of TFE to HCl being about 33 mol % TFE and 67 mol % of HCl. This mixture forms an azeotrope, so as TFE vaporizes, so does HCl in about the same proportion. The presence of HCl with the TFE in the vapor state renders the TFE non-ignitable, and therefore non-explosive, in the absence of air. HCl resolves the issue of the explosion hazard of TFE. However, it introduces a new problem of the separation and disposal of large quantities of HCl present, with TFE required for the polymerization of polytetrafluoroethylene and other polymers. HCl toxicity presents a hazard in the event it is released.

3.3 Preparation of Hexafluoropropylene Hexafluoropropylene is produced as a by-product of the pyrolysis of chlorodifluoromethane to produce TFE. The basic reaction for the formation is: 2 CHClF2 ➔ 2CF2: + 2 HCl (pyrolysis)

(3.7)

2CF2: ➔ CF2=CF2

(3.8)

CF2: + CF2=CF2 =CF2 ➔ CF3CF=CF2 (hexafluoropropylene)

(3.9)

Hexafluoropropylene (HFP; CF3CF=CF2, CAS number 116-15-4) was first synthesized by Downing et al.. [26] by a pyrolysis reaction. Henne conducted the complete synthesis and identification of HFP [27]. Henne used a six-step reaction, starting with the fluorination of 1, 2, 3-trichloropropane, also known as allyl trichloride, and glycerol trichlorohydrin. The reaction product was 2,2-dichloro-1,1,1,3,3,3-hexafluoropropane. To obtain HFP he dehalogenated the latter with metallic zinc in a medium of boiling ethanol. HFP is produced as in the preparation of TFE. HFP yields may be improved by variation of the reaction process conditions at the expense of a lower TFE yield. Basically, the pyrolysis temperature is reduced and a steam diluent is added to the reaction medium [28, 29]. HFP may also be prepared by a multistep fluorination hexachloropropylene which is the chlorine analog of HFP [30]. In the follow-up steps the fluorination products are converted to CF3-CFCl-CF3, which is finally dechlorinated to HFP. Other methods describe the synthesis of HFP from the mixtures of a number of linear and cyclic tricarbon hydrocarbons with a partially halogenated three-carbon acyclic hydrocarbon. TFP and HFP are co-produced by pyrolyzing compounds such as fluoroform, chlorodifluoromethane, chlorotetrafluoroethane, mixtures of chlorodifluoromethane and chlorotetrafluoroethane, or mixtures of perfluorocyclobutane and chlorodifluoromethane [31]. The reaction products consist of fluorinated olefins including TFE and HFP. The reaction reported by Gelblum et al. was conducted at temperatures between 600 and 1,000°C, using a gold-coated tube reactor because of the corrosivity of the reaction compounds and products.

3.4 Properties of Hexafluoropropylene HFP is a non-flammable, colorless, odorless, tasteless gas with relatively low-toxicity (Table 3.2). It boils at −29.4°C and freezes at −156.2°C. HFP has relatively low reactivity compared to TFE. No commercial homopolymers of HFP have been developed. HFP (CF3CF=CF2) is used as a comonomer in a number of fluoropolymers along with TFE and vinylidene fluoride. It is one of the monomers used to “modify” the properties of homo-fluoropolymers, primarily to reduce the extent and rate of recrystallization. HFP is extremely stable with respect to auto-polymerization, in contrast to TFE. It can be stored in a liquid state in the absence of a reaction inhibitor. HFP is thermally stable up to 400–500°C. At about 600°C, under vacuum, HFP decomposes and produces octafluoro-2-butene (CF3CF=CFCF3) and octafluoroisobutylene [33].

Synthesis and Properties of Monomers

31

TABLE 3.2 Properties of Hexafluoropropylene [32] Property

Value

CAS No. Molecular weight Boiling point at 101.3 kPa, °C Freezing point, °C Critical temperature, °C Critical pressure, MPa Critical density, g/ml Heat of formation for ideal gas at 25°C, ∆H, kJ/mol

116-15-4 150.02 −29.4 −156.2 85 3254 0.60 −1,078.6 879

Heat of polymerization to solid polymer at 25°C, ∆H , kJ/mol Flammability limits in air at 101.3 kPa, volume%

Nonflammable at all mixing ratios

HFP readily reacts with a number of elements, namely hydrogen, chlorine, and bromine by an addition mechanism analogous to other olefins [34–36]. Hydrogen halides such as hydrofluoric, hydrochloric, and hydrobromic acids react with HFP. The reaction of HFP with ammonia, alcohols, and mercaptans produces tetrafluoropropionitrile (CF3CFHCN), hexafluoro ethers (CF3CFHCF2OR), and hexafluoro sulfides (CF3CFHCF2SR). The reaction of HFP with butadiene and cyclopentadiene yields Diels–Alder adducts. Alkali metal halide catalysis of HFP in N,N-dimethylacetamide can generate dimers and trimers of HFP [37].

3.5 Synthesis of Perfluoroalkylvinylethers Perfluoroalkylvinylethers (PAVEs), such as perfluoroethylvinylether and perfluoropropylvinylether (PPVE) (CF2=CF-O-C3F7, CAS number 1623-05-8), are synthesized by three reaction steps. PPVE is prepared according to the following steps: 1. Oxidation of PPVE to hexafluoropropylene oxide (HFPO) by reacting it with oxygen in a diluent inert gas. Alternatively, oxygen can be replaced with hydrogen peroxide reacted at temperatures between 50 and 250°C. 2. HFPO is reacted with a perfluorinated acyl fluoride to obtain perfluoro-2-alkoxy-propionyl fluoride. 3. Perfluoro-2-alkoxy-propionyl fluoride is reacted with an alkali or alkaline earth metal salt containing oxygen at elevated temperatures to produce PPVE. Alternative techniques including electrochemical methods are used for the production of perfluoro2-alkoxy-propionyl fluoride. There are also electrochemical processes for the production of perfluoro2-alkoxy-propionyl fluoride [38, 39]. A process has been reported for the preparation of perfluoroalkylvinylethers by fluorination using elemental fluorine of selected novel partially fluorinated dichloroethyl ethers, followed by dehalogenation to the corresponding perfluoroalkylvinylether. Perfluoroalkylvinylethers have been found to be useful as monomers for thermoplastic resins and elastomers [40]. An efficient process with a high reaction rate has been reported for the production of perfluoro (alkyl vinyl ethers). This process consists of dehalogenation, preferably chlorine, from carbon atoms α and β to an ether oxygen in an α,β-dihaloperfluoro ether in which the α,β-dihaloperfluoro ether reacts with zero valent zinc in pyrrolidinone. More specifically the process results in the production of CF2═CFOCF2CF2SO2F from CF2ClCFClOCF2CF2SO2F at relatively high yields in which CF2ClCFClOCF2CF2SO2F reacts with the zero valent zinc in the presence of N-methyl-2-pyrrolidinone [38].

32

Technology of Fluoropolymers

TABLE 3.3 Properties of PPVE [41, 42] Property

Value

CAS no. Molecular weight Boiling point (at 101.3 kPa), °C Melting point, °C Flash point, °C Density, g/cm3 Critical temperature, °C Critical pressure, MPa Flammability limits in air at 101.3 kPa, volume%

1623-05-8 266.04 35–36 −70 −20 1.53 150.58 1.91 1

3.6 Properties of Perfluoroalkylvinylethers PAVEs are a useful class of monomers in the polymerization of fluoropolymers. They are effective monomers for the “modification” of the properties of fluorinated homopolymers such as PTFE. Modification here refers to the incorporation of less than 1% by weight of PAVEs in the fluoropolymers which may be called “minor copolymers”. The small amount of incorporation has no impact on important properties of PTFE including thermal stability or chemical resistance. Conversely, HFP reduces the thermal stability of its copolymers with TFE. PAVEs are also used in more extensive quantities as comonomers of TFE. Important commercial examples include perfluoropropyl vinyl ether (PPVE, C3F7-O-CF=CF2), perfluoroethyl vinyl ether (PEVE, C2F5-O-CF=CF2), and perfluoromethyl vinyl ether (PMVE, CF3-O-CF=CF2), all of which are used to produce melt processible copolymers of TFE. PEVE is an odorless, colorless to yellow liquid at room temperature. It is less toxic than HFP. It is highly flammable, burning with a colorless flame. Information about the properties of PAVEs can be found in a number of publications [41, 42]. Some of the important properties of PPVE are listed in Table 3.3.

3.7 Synthesis of Chlorotrifluoroethylene (CTFE) Chlorotrifluoroethylene (CTFE) is easier to prepare than the other perfluorinated monomers. The original commercial method starts with hexachloroethane and hydrofluoric acid. A mixture of these two compounds in the presence of chloro antimony fluoride produces R-113 [1,1,2-trichloro-1,2,2-trifluoroethane (TCTFE)]. Chlorine is removed from TCTFE by pyrolysis at 500–600°C in the presence of steam. Zinc can also be used to dechlorinate TCTFE at 95

Noncrystalline, amorphous Soluble at ambient temperature in fluorinated solvents Transparent Lower refractive index Stiffer High gas permeability

CF2=CF-O-CF2-CF2-CF=CF2 Perfluoro(3-butenyl vinyl ether)

Poly perfluoro(3-butenyl vinyl ether) FIGURE 14.2 Structure of the CytopTM monomer and polymer [3, 8].

by dipping. Other solution-based methods are spraying as a paint for more thickly coated layers. Ultrathin layers without the use of solvent are applied by laser ablation methods [3]. Another amorphous perfluoropolymer of this type has been developed by Asahi Glass under the trade name Cytop®. Unlike semicrystalline fluoropolymers, Cytop® is exceptionally transparent, with visible light transmission levels exceeding 95%. This polymer is prepared by the cyclopolymerization of perfluoro(3-butenyl vinyl ether) (PBVE). The monomer and polymer structures can be seen in Figure 14.2 [8]. Table 14.3 illustrates some of the similarities of CytopTM to commercial perfluoropolymers and some differences between them. TABLE 14.3 Physical and Mechanical Properties of CytopTM Compared with Competitive Polymers Property

CYTOP

PTFE

PFA

PMMA

Remarks

Glass transition temperature (oC) Melting point (oC) Density (g cm-3) Contact angle of water (degrees) Critical surface tension (dyne cm-1) Water absorption (%) Tensile strength (kg cm–2) Elongation at break (%) Yield strength (kg cm–2) Tensile modulus (kg cm–2)

108 Not observed 2.03 110 19 300°C. These two properties were needed in the pre-World War II era and in post-War industries. PTFE thus took off, first to meet military needs and then industrial requirements [3]. The thermal stability of PTFE has been the subject of extensive studies as indicated by numerous published studies beginning shortly after its inception [4] and continuing on into the twenty-first century [5, 6]. PTFE has the highest melting point, processing, and continuous use temperatures among all commercial fluoropolymers. Table 16.1 shows a comparison of these temperatures for a number of common fluoropolymers. In spite of their stability, when fluoropolymers degrade at elevated temperatures they produce toxic compounds. In this chapter, the thermal stability of some of the commercial fluoropolymers are reviewed. PTFE is the first polymer discussed because of its importance throughout its over three-quarters of a century existence as well as having the largest consumption among all fluoropolymers.

16.2 Thermal Stability of PTFE PTFE resins are stable when used at or below their maximum continuous use temperature 260°C. When the temperature exceeds the melting point of PTFE (342°C) degradation begins to accelerate slowly. A major point of acceleration in degradation is when polymer temperatures reach 380°C. This is the reason why the maximum PTFE process temperature is held below 380°C [7]. The fundamental properties of fluoropolymers stem from the atomic structure of fluorine and carbon and their covalent bonding in specific chemical structures. The backbone is formed of carbon–carbon bonds and the pendant groups are carbon–fluorine bonds. Both C–C and C–F are extremely strong bonds. The basic properties of PTFE are derived from these two very strong chemical bonds. The size of the fluorine atom allows the formation of a uniform and continuous shield around the carbon–carbon bonds which protects them from chemical attacks including by oxygen. The rate of PTFE decomposition and degradation products depends on temperature, time at temperature, pressure, and the type of environment. The course and products of the thermolysis of PTFE differ under air (O2) versus under a vacuum or inert gas. Degradation onset takes place at nearly the same temperature under air and nitrogen atmospheres. Degradation ends at a somewhat higher temperature, about 620°C, under nitrogen. The biggest difference between air and nitrogen or vacuum is in the products of degradation. Degradation under a vacuum or under an atmosphere favors the formation of a tetrafluoroethylene monomer. Under a vacuum, PTFE decomposes into a nearly pure monomer [8–10]. DOI: 10.1201/9781003204275-22

257

258

Technology of Fluoropolymers

TABLE 16.1 Melting Point, Processing, and Continuous Use Temperatures of Commercial Fluoropolymers Fluoropolymer* PTFE (1st and 2nd) PFA MFA FEP ETFE ECTFE PCTFE PVDF PVDF Copolymer PVF

Melting Point, °C 342, 342 305 280 260 218–280** 230–240 215 170 115–170** 195

Processing Temperature, °C