Energy-Based Control of Electromechanical Systems: A Novel Passivity-Based Approach 3030587851, 9783030587857

Table of contents :
Series Editor’s Foreword
Preface
Acknowledgments
Contents
1 Introduction
2 Mathematical Preliminaries
2.1 Control of Linear Systems
2.2 Mathematical Tools for the Study of Nonlinear Control Systems
2.3 Passivity
2.4 A Novel Passivity-Based Approach for Control of Electromechanical Systems
2.5 The Electromechanical Systems that Are Studied in This Book
3 Permanent Magnet Brushed DC-Motor
3.1 Motor Modeling
3.1.1 A Simple Methodology
3.1.2 A General Methodology
3.2 Standard Control
3.2.1 Case 1
3.2.2 Case 2
3.2.3 Case 3
3.2.4 Case 4
3.2.5 An Improved PI Velocity Controller
3.2.6 An Improved PID Position Controller
3.3 The Standard Control Scheme Revisited
3.4 Open-Loop Energy Exchange
3.4.1 The Velocity Model
3.4.2 The Position Model
3.5 Velocity Control
3.6 Position Control
3.7 Velocity Control Using a DC/DC Buck Power Converter As Power Amplifier
3.7.1 Dynamic Model
3.7.2 Open-Loop Energy Exchange
3.7.3 Control of the DC to DC Buck Converter DC-Motor System
3.7.4 Experimental Results
4 Permanent Magnet Synchronous Motor
4.1 Motor Modeling
4.1.1 The Working Principle
4.1.2 Three-Phase Dynamic Model
4.1.3 Park's Transformation or dq Transformation
4.1.4 The dq Dynamic Model
4.1.5 dq Decomposition of the Stator Magnetic Flux
4.1.6 Standard Field-Oriented Control
4.2 Open-Loop Energy Exchange
4.2.1 The Velocity Model
4.2.2 The Position Model
4.3 Velocity Control
4.3.1 Simulation Results
4.4 Position Control
4.4.1 Simulation Results
4.5 Velocity Ripple Minimization
4.5.1 Mutual Torque
4.5.2 Reluctance Torque
4.5.3 Cogging Torque
4.5.4 Torque Ripple
4.5.5 The Problem to Solve
4.5.6 Stability Analysis
4.5.7 Experimental Results
4.6 A Practical PM Synchronous Motor
4.6.1 Magnetic Field at the Air Gap
4.6.2 Magnetic Flux Linkages
4.6.3 The Motor dq Dynamical Model
4.7 Another Practical PM Synchronous Motor
4.7.1 Magnetic Field at the Air Gap
4.7.2 Magnetic Flux Linkages
4.7.3 The Motor dq Dynamical Model
5 Induction Motor
5.1 Motor Modeling
5.1.1 The Working Principle
5.1.2 Three-Phase Dynamical Model
5.1.3 ab Transformation
5.1.4 The ab Dynamical Model
5.1.5 Park's Transformation or dq Transformation
5.1.6 The dq Dynamical Model
5.1.7 dq Decomposition of the Magnetic Flux
5.1.8 Standard Indirect Field-Oriented Control
5.2 Open-Loop Energy Exchange
5.2.1 The Velocity Model
5.2.2 The Position Model
5.3 Velocity Control
5.3.1 Simulation Results
5.4 Position Control
5.4.1 Simulation Results
5.5 A Practical Induction Motor
5.5.1 Magnetic Field at the Air Gap
5.5.2 The Magnetic Flux Linkages
5.5.3 The Motor Dynamic Model
6 Switched Reluctance Motor
6.1 Motor Modeling
6.1.1 The Working Principle
6.1.2 Magnetic Circuits
6.1.3 SRM Unsaturated Dynamical Model
6.1.4 SRM Saturated Dynamical Model
6.1.5 The Torque Sharing Approach
6.1.6 Standard Control
6.2 Open-Loop Energy Exchange
6.2.1 The Unsaturated Velocity Model
6.2.2 The Saturated and Unsaturated Position Models
6.3 Velocity Control
6.3.1 Simulation Results
6.4 Position Control
6.4.1 Position Control Without Velocity Measurements
6.4.2 Position Control Taking into Account Magnetic Saturation
6.5 A Practical Switched Reluctance Motor
6.5.1 Magnetic Field at the Air Gap
6.5.2 Magnetic Flux Linkages
6.5.3 SRM Dynamical Model
7 Synchronous Reluctance Motor
7.1 Motor Modeling
7.1.1 The Working Principle
7.1.2 dq Dynamical Model
7.1.3 Standard Field-Oriented Control of a SYRM
7.2 Open-Loop Energy Exchange
7.2.1 The Velocity Model
7.2.2 The Position Model
7.3 Velocity Control
7.4 Position Control
8 Bipolar Permanent Magnet Stepper Motor
8.1 Motor Modeling
8.1.1 The Working Principle
8.1.2 Dynamical Model
8.1.3 Standard Control
8.2 Open-Loop Energy Exchange
8.2.1 The Velocity Model
8.2.2 The Position Model
8.3 Velocity Control
8.3.1 Simulation Results
8.4 Position Control
8.4.1 Simulation Results
8.5 A Practical PM Stepper Motor
9 Brushless DC-Motor
9.1 Motor Modeling
9.1.1 Dynamic Model
9.1.2 Standard Control
9.2 Open-Loop Energy Exchange
9.2.1 The Velocity Model
9.2.2 The Position Model
9.3 Velocity Control
9.3.1 Simulation Results
9.4 Position Control
9.4.1 Simulation Results
9.5 A Practical BLDC Motor
9.5.1 Magnetic Field at the Air Gap
9.5.2 Magnetic Flux Linkages
9.5.3 Mathematical Model
10 Magnetic Levitation Systems and Microelectromechanical Systems
10.1 Magnetic Levitation Systems
10.1.1 Mathematical Model
10.1.2 Open-Loop Energy Exchange
10.1.3 Position Control
10.1.4 Simulation Results
10.2 Microelectromechanical Systems
10.2.1 Mathematical Model
10.2.2 Open-Loop Energy Exchange
10.2.3 Position Control
10.2.4 Simulation Study
11 Trajectory Tracking for Robot Manipulators Equipped with PM Synchronous Motors
11.1 Dynamical Model of Robot Manipulators Equipped with PM Synchronous Motors
11.2 Main Result
11.3 Simulation and Experimental Results
11.3.1 Simulation Study
11.3.2 Experimental Results
12 PID Control of Robot Manipulators Equipped with SRMs
12.1 Dynamical Model
12.2 The Torque Sharing Approach
12.3 Main Result
12.3.1 The Rationale Behind Controller in Proposition 12.1
12.3.2 Sketch of Proof of Proposition 12.1
12.3.3 Closed-Loop Dynamics
12.3.4 A Positive Definite and Decrescent Function
12.3.5 Time Derivative of V(y)
12.3.6 Proof of Proposition 12.1
12.4 Simulation Study
Appendix A Energy Functions
A.1 Velocity Control
A.2 Position Control
A.3 Velocity Control with Saturated Integral of Velocity
A.4 PID position Control with Saturated Proportional and Integral Actions
A.5 Velocity Sensorless Regulator for Switched Reluctance Motors
A.6 Trajectory Tracking in Robots Equipped with PM Synchronous Motors
A.6.1 Positive Definiteness and Radially Unboundedness
A.6.2 Expression for Along the Trajectories of the Closed-Loop System
A.6.3 Entries of Matrix Q Introduced in (11.17摥映數爠eflinkRBTtrack:eq:10011.1711)
Appendix B Proofs of Propositions for Brushed DC-Motors
B.1 Proof of Proposition 3.3摥映數爠eflinkPropDCvelStandard3.33
B.2 Proof of Proposition 3.5摥映數爠eflinkPropDCposStandard3.53
B.3 Proof of Proposition 3.8摥映數爠eflinkmain1DCbuck3.83
Appendix C Proofs of Propositions for PM Synchronous Motors
C.1 Proof of Proposition 4.5摥映數爠eflinkpropPMSynMvel14.54
C.2 Proof of Proposition 4.12摥映數爠eflinkPIDpmsmGobalmain14.124
C.3 Proof of Proposition 4.18摥映數爠eflinkpropPMsynMpos14.184
Appendix D Proofs of Propositions for Induction Motors
D.1 Proof of Proposition 5.10摥映數爠eflinkmain1IMspsSsifoc5.105
D.1.1 Stability of the (tildeψdq,tildeId) Subsystem Dynamics
D.1.2 Additional Stability Properties of the (tildeψdq,tildeId) Subsystem Dynamics
D.1.3 Boundedness of the State and Global Convergence to the Origin in the Complete Closed-Loop System
D.2 Proof of Proposition 5.20摥映數爠eflinkmain1IMspsSsifocPos5.205
Appendix E Proofs of Propositions for Switched Reluctance Motors
E.1 A Function to Replace sqrtvertτ*vert, forallvertτ*vertleqT*
E.2 Proof of Proposition 6.1摥映數爠eflinkSRMctrlspsprop16.16
E.3 Proof of Proposition 6.16摥映數爠eflinkposSRMCTRLspspropSat6.166
E.3.1 Closed-Loop Dynamics
E.3.2 A Positive Definite and Decrescent Function
E.3.3 Time Derivative of V(y)
E.3.4 Proof of Proposition 6.16摥映數爠eflinkposSRMCTRLspspropSat6.166
Appendix F Proofs for BLDC Motors
F.1 Proof of Proposition 9.1摥映數爠eflinkposmain1BLDC9.19
F.1.1 Closed-Loop Dynamics
F.1.2 A Positive Definite and Decrescent Function
F.1.3 Time Derivative of V(y)
F.1.4 Proof of Proposition 9.1摥映數爠eflinkposmain1BLDC9.19
F.2 Proof of Proposition 9.7摥映數爠eflinkpropBLDCpend9.79
F.2.1 Closed-Loop Dynamics
F.2.2 A Positive Definite and Decrescent Function
F.2.3 Time Derivative of V(y)
F.2.4 Proof of Proposition 9.7摥映數爠eflinkpropBLDCpend9.79
Appendix G Derivation of Some Expressions for the Proofs in Chap.10摥映數爠eflinkMagLev1010
G.1 Proof of Proposition 10.1摥映數爠eflinkpropMagLevMain10.110
G.2 Proof of Proposition 10.7摥映數爠eflinkpropMEMSMain10.710
Appendix References
Index

Polecaj historie

Energy-Based Control of Electromechanical Systems: A Novel Passivity-Based Approach [1st ed.] 9783030587857, 9783030587864

This book introduces a passivity-based approach which simplifies the controller design task for AC-motors. It presents t

602 127 23MB Read more

Electric Drives and Electromechanical Systems: Applications and Control [2 ed.] 0081028849, 9780081028841

Electric Drives and Electromechanical Devices: Applications and Control, Second Edition, presents a unified approach to

1,370 281 20MB Read more

Design of Electromechanical and Combination Products: An Agile and Systems Approach [2 ed.] 1032294078, 9781032294070

The second edition of this work, now with the expanded title of Design of Electromechanical and Combination Products, co

182 96 27MB Read more

Scheduling and Reconfiguration of Real-Time Systems : A Supervisory Control Approach 9783031419690, 9783031419683

This book presents a methodology for the real-time scheduling problems of real-time systems (RTS) from the viewpoint of

128 8 Read more

Feedback Control Systems: Matlab/Simulink Approach 1681735393, 9781681735399

Feedback control systems is an important course in aerospace engineering, chemical engineering, electrical engineering,

2,798 405 14MB Read more

The Magic Ring: Systems Thinking Approach to Control Systems (Contemporary Systems Thinking) 9783030641948, 9783030641931, 3030641945

212 105 95MB Read more

Smart Electromechanical Systems: Situational Control [1st ed. 2020] 978-3-030-32709-5, 978-3-030-32710-1

This book introduces the latest achievements of Russian scientists regarding the theory and practice of situational cont

396 95 11MB Read more

Sensitivity of automatic control systems

866 135 4MB Read more

Flow Modelling and Control in Pipeline Systems: A Formal Systematic Approach [1st ed. 2021] 9783030592455

This book introduces novel methods for leak and blockage detection in pipelines. The leak happens as a result of ageing

641 65 6MB Read more

Fundamentals of Linear Control: A Concise Approach 9781107187528

Taking a different approach from standard thousand-page reference-style control textbooks, Fundamentals of Linear Contro

908 148 7MB Read more