Eco-friendly and Smart Polymer Systems [1st ed.] 9783030450847, 9783030450854

This proceedings book presents the main findings of the 13th International Seminar on Polymer Science and Technology ( I

503 23 89MB

English Pages XXXIV, 733 [747] Year 2020

Report DMCA / Copyright

DOWNLOAD FILE

Eco-friendly and Smart Polymer Systems [1st ed.]
 9783030450847, 9783030450854

Table of contents :
Front Matter ....Pages i-xxxiv
Front Matter ....Pages 1-1
Relationship Between Curing Characteristics and Mechanical Properties of HTV Silicone Rubber (Hamidreza Heidari, Azam Jalali-Arani)....Pages 3-6
Porous Scaffolds of Polyvinyl Pyrrolidone/Polyethylene Glycol/Nano-Diamond Using Gamma Irradiation (Ali Jabbar, Susan Dadbin, Masoud Frounchi)....Pages 7-10
Chitosan and Polyethylene Glycol Nanocomposites Designed to Deliver Anticancer Drug: Molecular Dynamics Simulations (Zahra Shariatinia, Azin Mazloom Jalali)....Pages 11-14
Molecular Dynamics Simulations on Polycaprolactone Nanocomposite Drug Delivery Systems (Zahra Shariatinia, Azin Mazloom Jalali)....Pages 15-18
Fabrication of Antibacterial Electrospun Chitosan-Polyethylene Oxide Nanocomposite Nanofibrous Mats (Zahra Shariatinia, Iraj Kohsari)....Pages 19-22
Biocompatible Electrospun Nanofibrous Mats Designed for Controlled Co-release of Hydrocortisone and Imipenem/Cilastatin Drugs (Zahra Shariatinia, Yousef Fazli)....Pages 23-26
Peptide Release Behavior from in-Situ Forming Implants: Effect of Multi-walled CNT on Release Profile (Ehsan Avazverdi, Hamid Mobedi, Hamid Mirzadeh)....Pages 27-30
Drug Release Modeling Through a 3-Stage Model on Hydrophobic Modified Carboxymethyl Chitosan Nanoparticles (Nafise Olov, Hamid Mirzadeh, Shadab Bagheri_Khoulenjani)....Pages 31-34
Skin Tissue Engineering Electrospun Scaffold Based on PCL/PVA/ Aloevera (Marjan Shabannejad, Mohammad Sadegh Nourbakhsh, Amir Salati)....Pages 35-38
Fabrication of Biocompatible PLGA/PCL/PANI Nanofibrous Scaffolds with Electrical Excitability (Houra Farkhondehnia, Mohammad Amani Tehran, Fatemeh Zamani)....Pages 39-42
Improved Solubility of Acetamidophenol from PEG-and Witepsol-Based Suppositories via Formation of Inclusion Complex by β-Cyclodextrin with a Controlled Release Profile (Faezeh Asgari, Sahar Amiri, Majid Ghiass)....Pages 43-46
Rigid Semi-IPN PVC Foam Modified with Epoxidized Soybean Oil (Behnam Khaledi, Farah Salehiravesh)....Pages 47-51
An Investigation on the Effect of Pressure and Temperature on Microcellular Foams of Polylactic Acid (PLA)/Acrylonitrile-Butadiene-Styrene (ABS) Binary Blends (Mohammad Reza Kamrani, Miguel Sanchez-Soto, Alireza Aghili, Amir Ramezannejad)....Pages 52-55
Physical Properties and Antibacterial Activity of Chitosan/Carboxymethyl Cellulose/Starch Biofilms as Natural Bio-Based Polymers (Alireza Joorabloo, Zohreh Mansoori-Moghadam, Armaghan Moghaddam, Mohammad-Taghi Khorasani)....Pages 56-59
Effect of Potassium Sorbate on the Mechanical and Thermal Behaviors of Multi-blends Based on LLDPE/LDPE/PLA with PE-g-MA as Compatiblizer (Z. Tolouei Shiviari, Abdulrasoul Oromiehie)....Pages 60-63
Investigation of In Situ Systems of Progesterone in Biphasic Media (Maryam Armiun, Seyed Mojtaba Taghizadeh, Hamid Mobedi)....Pages 64-66
Fractionation of Poly1-Decene Based Oil Synthesized with AlCl3/Ethanol Cationic Catalyst in the Presence of Toluene Solvent (Amene Rahbar, Naeimeh Bahri-Laleh, Sevda Dehghani, Mehdi Nekoomanesh)....Pages 67-70
Study on Rheology, Crystallinity and Electrical Resistance of Poly(Lactic Acid)/Graphene Oxide Nanocomposites (Fatemeh Farhanmoghaddam, Azizeh Javadi)....Pages 71-74
Fabrication of NO-Releasing Silk Fibroin Nanofiber for Wound Dressing Application (Mina Vaez Ghasemi, Jhamak Nourmohammadi)....Pages 75-78
Fabrication and Characterization of PCl/Gelatin/Forsterite Nanofibrous Scaffolds Used for Modification of the Implants (Fatemeh Khosravi, Saied Nouri Khorasani, Hamid Zilouei, Rasoul Esmaeely Neisiany)....Pages 79-82
Biodegradable 3D Printed Scaffolds Based on PLA for Bone Tissue Engineering (Shaghayegh Kaviani-Samani, Shadab Bagheri-Khoulenjani, Hamid Mirzadeh, Soheil Dariushi)....Pages 83-86
Synthesis and Characterization of Biodegradable and Nontoxic Water Borne Copoly(Ether-Urethane-Urea)s Based on Amino Acid Derivatives (Shayesteh Tafazoli, Fatemeh Rafiemanzelat)....Pages 87-91
In Situ Forming Hydrogels Based on Clickable Star-PEG for Biomedical Applications (Mohammad Hossein Ghanian, Hamid Mirzadeh, Hossein Baharvand)....Pages 92-95
Influence of Polyolefin Elastomer Content on Morphology, Rheology and Thermal Behavior of Toughened Polylactic Acid/Polyolefin Elastomer Blends (Nadia Jalalifar, Babak Kaffashi)....Pages 96-99
Electrospinning of Polycaprolactone (PCL)/Poly(Lactic Acid) (PLA)/Ferula Gummosa Boiss Extract (Galbanum) (Mohaddeseh Sharifi, Melika Sharahi, Sara Labbafi, S. Hajir Bahrami, Nahid Hemmati Nejad)....Pages 100-104
Synthesis of Biodegradable Unsaturated Polyester Resin Using Soybean Fatty Acid as an Acidic Monomer (Nika Parsi, Masoud Jamshidi, Mohsen Sarrafi)....Pages 105-107
Fabrication of Gelatin 3-D Nanofibers via Wet Electrospinning Method (Sarah Karimi, Mohamad Pezeshki-Modaress, Najmeh Najmoddin)....Pages 108-111
Fabrication and Characterization of Hybrid Scaffolds Based on β-TCP/PCL-HAp/Gel Nanofibers for Bone Regeneration (Melika Sharahi, Mohaddeseh Sharifi, Sara Labbafi, S. Hajir Bahrami, Nahid Hemmati-Nejad)....Pages 112-116
Surface Modification of Polyurethane Films with Chitosan and Collagen Biomolecules, Using Layer by Layer Self-Assembly Method to Improve Biocompatibility Properties (Narges Bahrami, Saied Nouri Khorasani, Hamid Mahdavi)....Pages 117-121
Front Matter ....Pages 123-123
Performance of Room Temperature Cross-Linkable Acrylic Latexes Synthesized Using DAAM and AAEMA Functional Monomers (Saba Goharshenas Moghadam, Shahla Pazokifard, Hamidreza Parsimehr)....Pages 125-128
Effect of Curing Conditions on the Surface and Bulk Properties of High Solid Silicone-Epoxy Coatings (Mohammad Yasin Mollajavadi, Shahla Pazokifard, Seyed Mojtaba Mirabedini)....Pages 129-132
Synthesis of UV-Curable Urethane Acrylate Zirconium Oxide Nanocomposites as Thermal Insulator (Abbas Madhi, Behzad Shirkavand Hadavand, Ali Amoozadeh)....Pages 133-136
Antibacterial Performance of Biomimetic Modification of Polymeric Surfaces: Rice-like and Lotus Pattern (Masoumeh Ayazi, Nadereh Golshan Ebrahimi)....Pages 137-140
Fabrication of Ag/TiO2-Coated Textile Fabric via a New Photoreduction Method as an Eco-Friendly Technique (Zahar Moridi Mahdieh, Shahla Shekarriz, Faramarz Afshar Taromi)....Pages 141-144
Fabrication of Super-Hydrophobic Fabric by Eco-Friendly Plasma Technique (Zahar Moridi Mahdieh, Shahla Shekarriz, Faramarz Afshar Taromi)....Pages 145-148
Nano-Silica Extracted from Rice Husk Ash: Effect on the Thermal Properties of Hydroxyethyl Cellulose (Niloofar Bakhtiari-Nasr, Ahmad Reza Bahramian)....Pages 149-152
Spectroscopic Study of Waterborne Polyurethane/Acrylate Hybrids Based on Acrylate Monomers Contents (Ghazal Minoofar, Hengameh Honarkar, Mehdi Barikani)....Pages 153-156
Enhancing Corrosion Resistance of Alkyd Coatings Using Cerium Nitrate Hexahydrate Treated Ceria Nanoparticles (Sepideh Parchami, Seyed Mojtaba Mirabedini, Shahla Pazokifard, Morteza Behzadnasab)....Pages 157-161
Surface Modification of BOPP Film Using a Gliding Arc Plasma and Low Pressure Atmospheric Plasma (Fahime Darvish, Mohammadreza Khani)....Pages 162-165
Effect of Low-Functionalized Graphene Oxide on the Rheological and Electrical Properties of Water-Based Epoxy Coatings (Amir Rezvani Moghaddam, Milad Kamkar, Zahra Ranjbar, Uttandaraman Sundararaj, Ali Jannesari)....Pages 166-169
Environmentally Friendly Hybrid Polysilsesquioxane-Poly(Butyl Acrylate) Nanocomposite: Film Properties (Ali Ahmadi Dehnoei, Somayeh Ghasemirad)....Pages 170-173
Protection of Structural Buildings Against Dirt Adsorption: Photoactive Cements vs. Photoactive Coating (Fatemeh Mohammadi, Seyed Mojtaba Mirabedini, Khosro Khodabakhshi, Shahla Pazokifard)....Pages 174-177
Front Matter ....Pages 179-179
Improved Conductivity and Film Forming of Transparent PEDOT:PSS Electrodes Using Non-ionic Surfactants (Milad Kianpisheh, Bahareh Rezaei, Faramarz Afshar-Taromi)....Pages 181-183
Sol–Gel Preparation and Characterization of Antibacterial and Self-cleaning Hybrid Nanocomposite Coatings (Sahar Amiri, Seyed Armin Zare Estekhraji)....Pages 184-188
Synthesis of [email protected] Core-Shell Structure for Solar Cell Application (Bahareh Rezaei, Milad Kian Pisheh, Zahra Babaei, Bahareh Nasrollahi, Faramarz Afshar Taromi)....Pages 189-192
Effect of Monomer Concentration in Primary Sol on the Colloid like Particle Size of Novolac Aerogel (Golnoosh Abdeali, Ahmad Reza Bahramian, Mahdi Abdollahi)....Pages 193-196
Synthesis of Paraffin Wax Phase Change Material Nanoencapsulated by Polyurethane via Interfacial Polymerization (Hediyeh Nikpourian, Ahmad Reza Bahramian, Mahdi Abdollahi)....Pages 197-200
Adsorption of Acid Red 1 onto Functionalized Silica by Amine-Terminated Dendritic Polymers: Isotherms and Kinetic Models (Samane Goftari, Somaye Akbari)....Pages 201-204
Effect of Waste Paper Extracted Cellulose on the Structure and Properties of Resorcinol Formaldehyde Aerogel (Parisa Hakimi, Ahmad Reza Bahramian)....Pages 205-207
PVA Electrospun Hollow Nanofibers via One-Pot Coaxial Electrospinning (Niloufar Ghaedi Dehaghi, Sobhan Sharafkhani, Mehrdad Kokabi)....Pages 208-211
A Molecular Dynamics Approach to Study Polymer/Nano-Filler Interactions (Hesam Makki, Farhad Sharif, Morteza Ebrahim)....Pages 212-215
Curing Characteristics of Phenolic Syntactic Foams Based on Oxygen Plasma Treated Hollow Glass Microspheres (Milad Karbalaei-Bagher, Rasool Amirkhani, Mohammad-Hassan Omidi)....Pages 216-219
Optimization of Methylene Blue Dye Batch Adsorption by Carboxylic Acid Functionalized Halloysite Nanotubes (Mohammad Hassan Kanani-Jazi, Somaye Akbari)....Pages 220-223
Front Matter ....Pages 225-225
Effect of Crosslinking Agent Concentration on Swelling Behavior of Acrylic-Nanocellulose Hydrogels (Mahnaz Shahzamani, Navid Naseri, Fariba Safaei)....Pages 227-230
Swelling Behavior of Acrylic-Cellulose Hydrogels for Agricultural Applications: Effect of Reactants Concentration (Mahnaz Shahzamani, Navid Naseri)....Pages 231-234
Preparation of a New Antioxidant for Polypropylene Based on Quercetin (Afarin Rahmati, Reza Jahanmardi, Sahar Amiri)....Pages 235-238
Controlling the Adsorption of Scleroglucan Polymer on the Surface of Carbonate Particles by Grafting Acyl Chlorides with Different Chain Lengths (Behnam Davoodi, Alireza Sharif, Jamal Aalaie)....Pages 239-242
Chemical Modification of Polyfurfuryl Alcohol Resin Using Maleic Anhydride: FTIR Study of a Diels-Alder Reaction (Roghayyeh Marefat Seyedlar, Mohammad Imani, Seyed Mojtaba Mirabedini)....Pages 243-246
Hardness and Chemorheological Properties of Chemically-Modified Polyfurfuryl Alcohol Resin (Roghayyeh Marefat Seyedlar, Mohammad Imani, Seyed Mojtaba Mirabedini)....Pages 247-250
Influence of Cut-Out Shape on Buckling Behavior of Composite Beams (Soheil Dariushi)....Pages 251-254
Tensile Properties of Jute/Epoxy/Aluminum Hybrid Laminates (Sara Alirezaei, Soheil Dariushi, Mohammad Hosain Beheshty)....Pages 255-258
Adsorption Behavior of Cyclodextrin-Triazole-Titanium Based Nanocomposite for Heavy Metal Ions from Aqueous Solution (Zari Fallah, Hossein Nasr Isfahani, Mahmood Tajbakhsh)....Pages 259-263
Study on Tensile Properties of Nanocomposites Based on PLA Reinforced by Nanoclay and Nanocalcium Carbonate (Zahra Asadi, Azizeh Javadi)....Pages 264-267
Biodegradation and Thermal Properties of Biocomposites Based on Poly(Lactic Acid)/Thermoplasticized Rice Straw (Asa’ad Zandi, Amirhossein Zanganeh, Shayan Hosseini, Farkhondeh Hemmati, Jamshid Mohammadi-Roshandeh)....Pages 268-271
Vancomycin Loaded Silk/Pectin Hydrogel for Bone Tissue Engineering (Akbar Karkhaneh, Fereshteh Ahadi, Sajedeh Khorshidi)....Pages 272-275
Fabrication of Hybrid Suture Yarn Containing Chitosan/Poly(Vinyl Alcohole)-Poly(Lactic Acid) Micro and Nanofibers and Investigation of Their Mechanical Properties (Vida Saa’di, Marzieh Ranjbar Mohamadi, Meysam Moezzi, Reza Sghafi)....Pages 276-281
Benzylated Products of Rice Straw as Effective Fillers for Starch Biocomposites (Maryam Shoja, Farkhondeh Hemmati, Jamshid Mohammadi-Roshandeh)....Pages 282-285
Extrusion Foaming of PLA-Based Nanocomposites: Effects of Different Nanofillers and Chemical Reagents on Foam Morphology (Mohammad-Hasan Khademi, Sirwan Ghavami, Farkhondeh Hemmati, Mohammad-Ali Aroon)....Pages 286-289
Effect of Microorganisms on Rheological Behavior of Polymer Fluids (Behtab Montaser Kouhsari, Nadereh Golshan Ebrahimi)....Pages 290-293
Fabrication of Antibacterial PVP/Keratin Hydrogel Embedded with Lavender Extract (Faezeh Tajik, Niloofar Eslahi, Aboosaeed Rashidi)....Pages 294-296
Soybean Oil Derived Non-isocyanate Polyurethane with In Situ Formed Nano-silver as Antimicrobial Wound Dressing (Hoshyar Gholami, Hamid Yeganeh)....Pages 297-300
Diameter-Tuning of Electrospun Pectin-Based Nanofibers (Shahrzad Zirak Hassan Kiadeh, Azadeh Ghaee, Addie Bahi, Mehdi Farokhi, Jhamak Nourmohammadi, Frank K. Ko)....Pages 301-305
Synthesis of Chitosan/Zeolite/Silver Nanoparticles Composites: Antibacterial Activity Against Aquatic Bacteria (Fatemeh Salar Hosseini, Navid Ramezanian, Zoheir Shokouh Saljoghi)....Pages 306-309
Front Matter ....Pages 311-311
Effect of Nanoclay Concentration on the Curing and Mechanical Behavior of Chlorobutyl Rubber Nanocomposites (Matin Khamseh-Kajoori, Azam Jalali-Arani)....Pages 313-315
Effect of Hydroxyl Value of Acrylic Resin on the Anti-graffiti Properties of Acrylic-PU Nanocoating (Saba Nemati Mahand, Shahla Pazokifard, S. Mojtaba Mirabedini)....Pages 316-319
Microstructure and Mechanical Properties of Nanocomposite Based on PA6/NBR/Graphene (Mohammad Reza Nakhaei, Ghasem Naderi, Mir Hamid Reza Ghoreishy)....Pages 320-323
Numerical Simulation of Mixing Polymeric Fluids in Rotating Cylinder Rheometer (Ebrahim Khalaj, Mohammad Hossein N. Famili, Faezeh Ghodratpour)....Pages 324-327
Numerical Simulation of Mixing Polymeric Fluids in Twin Screw Extruder (Ebrahim Khalaj, Mohammad Hossein N. Famili, Faezeh Ghodratpour)....Pages 328-331
3D Simulation of Velocity Field for Polymeric Fluids in Twin Screw Extruder by Finite Volume Method (FVM) (Ebrahim Khalaj, Mohammad Hossein N. Famili, Faezeh Ghodratpour)....Pages 332-335
Study on Rheology, Morphology and Mechanical Properties of PLA/Nanoclay Nanocomposites (Fatemeh Mohammadzadeh, Romina Esmailzadeh, Azizeh Javadi)....Pages 336-339
Investigation on the Effects of Nanoclay and Nano Calcium Carbonate on Properties of Binary and Hybrid Nanocomposites Based on PLA (Kosar Alavi, Zahra Asadi, Fatemeh Mohammadzadeh, Azizeh Javadi)....Pages 340-343
Qualitative Characterization of Branches in Various Polyethylene Species via Fourier Transform Spectroscopy (Mohsen Mohammadi, Alireza Azizi)....Pages 344-347
Investigation of Thermal Stability of Polyethylene/Silica Aerogel Compounds (Mohammad Amin Abbas-Zadeh, Amir Hesam Arab Sorkhi, Mohsen Mohammadi)....Pages 348-350
Novel Polysulfone and Related Sepiolite Nanocomposites for Water Desalination (Samaneh Khodami, Samal Babanzadeh, Shahram Mehdipour-Ataei)....Pages 351-354
Synthesis and Characterization of Novel Poly(Arylene Ether Sulfone) for Desalination Application (Rahil Nahvi, Shahram Mehdipour-Ataei, Samal Babanzadeh)....Pages 355-358
Low Compression Set VMQ/XNBR Rubber Blends with Improved Aging Properties (Mustafa Azizi, Ghodratollah Hashemi Motlagh)....Pages 359-362
Morphology, Rheology and Impact Resistance of PS/EOC/SEBS Ternary Blends (Hasti Pourmadadkar, Mehdi Entezam, Hossein Ali Khonakdar, Seyed Hassan Jafari)....Pages 363-366
Acidic Dye Removal by Chitosan Treated Membrane Containing Spacer Fabric/Nylon6 Nanofibers/TiO2 Nanoparticles (Ehsan Yousefi, Marziyeh Ranjbar Mohammadi, Mohammad Nouri Taba)....Pages 367-370
Preparation of Fe3O4/Polymethyl Methacrylate Composite Particles from Monolayer Oleic Acid-Modified Fe3O4 (Roxana Moarref, Saeed Pourmahdian)....Pages 371-374
A Silicone-Based Macro-Initiator for RAFT Polymerization (Saeed Hanifi, Farhid Farahmand, Mohammad Imani)....Pages 375-378
Synthesis of Silicone-Based Amphiphilic Copolymer via RAFT Polymerization (Saeed Hanifi, Farhid Farahmand, Mohammad Imani)....Pages 379-382
Toughening Mechanism of Polyetheramine-Modified Epoxy Resins (Hossein Abdollahi, Ali Samadi, Somayyeh Hosseini Rad)....Pages 383-386
Investigation of Encapsulation of 1-Methylimidazole Latent Curing Agent Using Solid Epoxy Resin (Sayed Morteza Mozaffari, Mohammad Hosain Beheshty, Sayed Mojtaba Mirabedini)....Pages 387-390
Using the Rheo-Dielectric Method in Analyzing the Effect of System Dynamics on the Dispersion State of CB/PS Nanocomposites (Mona Janipour, Mohammad Hossein Navid Famili)....Pages 391-393
Analyzing and Comparing the Effect of System Dynamics on Agglomerations of CB/PS and TiO2/PS Nanocomposites Through Rheological Dielectric Method (Mona Janipour, Mohammad Hossein Navid Famili)....Pages 394-397
Improving Polypropylene Sediment Filter by Nano Surface Coating to Reduce Biomass Infection (Farzaneh Ghorab, Zarrin Es’haghi)....Pages 398-401
Microwave Curing of Epoxy Resin by Embedding Core-Shell Structure Particles (Sara Akbarpour Esfahlani, Jalil Morshedian, Habibollah Baharvand)....Pages 402-405
Enhancing In-plane Mechanical Properties of Carbon/Epoxy Composite Using Poly(methyl methacrylate) Nanofibers (Rasoul Esmaeely Neisiany, Saied Nouri Khorasani, Jeremy Kong Yoong Lee, Alireza Safdari, Seeram Ramakrishna)....Pages 406-409
Preparation and Characterization of Novel Polyureas Containing Amide Units with High Thermal Stability (Fatemeh Sadat Siadatian-Haghighi, Shahram Mehdipour-Ataei)....Pages 410-413
Synthesis and Properties of Novel Pyridine-Based Polyamides with Improved Solubility (Milad Lotfnejad-Moghimi, Amir Ahmad Latifi, Shahram Mehdipour-Ataei)....Pages 414-417
Nicotinic-Based Poly(ether-amide-imide)s: Preparation and Properties (Sattar Gholamrezaei Boshehri Nejad, Mehrdad Hasani, Shahram Mehdipour-Ataei)....Pages 418-421
Synthesis and Characterization of Core/Shell Titanium Dioxide Nanoparticle/Polyacrylamide Nanocomposite (Erfan Rezvani Ghomi, Saied Nouri Khorasani, Mohammad Dinari, Shahla Ataei, Rasoul Esmaeely Neisiany)....Pages 422-425
Electrochemical Conversion of Heavy Residues to Bitumen and Other Light Products by Silver (II) Mediator (Shahrnaz Mokhtari, Fereidoun Mohammadi, Zahra Panahi)....Pages 426-429
Synthesis of Polycarboxylate Superplasticizer: Influence of Temperature of Polymerization (Maryam Mohammadi, Alireza Redaei, Mohammad Ali Karimizarchi, Mohammad Ali Mohammad Mirzaei)....Pages 430-433
Effect of Silane Curing Conditions on Properties of the Metallocene-Based Polyethylene-Octene Copolymers Compound (Mehri Dana, Gholam Hossein Zohuri, Saeid Asadi)....Pages 434-437
The Relationship Between Adhesion and Electrochemical Parameters of Epoxy Resin on Mild Steel (Amir Hossein Jalali Kandeloos, Mohammad Reza Mohammadzade Attar)....Pages 438-441
Dielectric Properties of Polydimethylsiloxane (PDMS) Composites Containing Hybrid Silica-Decorated Reduced-Graphene Oxide ([email protected]) (Mohsen Sadroddini, Mehdi Razzaghi-Kashani)....Pages 442-445
Effect of Ethylene Monomer Pressure on BCE Ziegler-Nata Catalyst Fragmentation in the Early Stage of Polymerization (Mohammad Mansouri, Gholam Hossein Zohuri, Navid Ramezanian)....Pages 446-448
Evaluation of Mechanical Properties of Polylactic Acid/Nanoclay Nanofibers Using Taguchi Method (M. Aloushi, Marziyeh Ranjbar-Mohammadi, Ali Vahidifar, Elnaz Esmizadeh, Golshan Hajizadeh)....Pages 449-452
Creating Gas Lenses Using Polymer in a Minimum Pressure Range of 0.01 to 0.1 Bar (Soheila Shojaei, Mohammad Bohloul, Zhila Shah Ali)....Pages 453-456
Effect of Polymers on the Damping Capacity of Automotive Bitumen Anti-vibration Insulators (Haniyeh Miranmousavi, Gholamhossien Zohuri, Mohammad Nourmohammadi)....Pages 457-460
Effect of Nanoclay on the Morphological Properties of Ternary PA6/POE-g-MAH/LDPE Blend (Tahere Keramati, Shervin Ahmadi, Ali Salimi)....Pages 461-464
Optical Properties of PMMA Nanofibers with Different Fiber Diameters (Fatemeh Ahmadkhani Khari, Saeideh Gorji Kandi, Maryam Yousefzadeh, Farhad Panahi)....Pages 465-468
Effect of Compatibilizers on Polyamide 6 and Styrene-Butadiene Rubber Blend: Graphene Oxide and Glycidyl Methacrylate (Ramin Mirzaee, Ahmad Aref Azar)....Pages 469-472
Investigation of Tensile Strength and Impact Strength of Nanocomposites Based on PP/NBR/HNT (Amir Bakhtiari, Faramarz Ashenai Ghasemi, Ghasem Naderi, Mohammad Reza Nakhaei)....Pages 473-476
Synthesis and Characterization of Fe3O4 Magnetite Nanoparticles Coated by Polyvinylpyrrolidone (Alireza Heiran, Shadi Hassanajili, Mehdi Escrochi)....Pages 477-480
Cathodic Disbondment of Unpigmented Epoxy Coatings: Effect of Thickness, pH, and Curing Conditions (Shirin Ardeshirian Sharifabadi, Bahar Hassanpour, Mohammadreza Mohammadzadeh Attar)....Pages 481-484
Effect of Ultrasound Stimulation on the Chondrogenic Activity of MSCs on a Hybrid Hydrogel Scaffold (Ziba Naghizadeh, Akbar Karkhaneh, Arash Khojasteh)....Pages 485-487
Effect of Relative Energy Difference (RED) of Coagulation Bath on the Structure of Polysulfone Membrane (Rahim Dehghan, Jalal Barzin, Zahra KordKatooli, Shahla Mahdavi)....Pages 488-492
Improvement of Delamination Resistance in Glass/Phenolic Composite Laminates with Nano-interlayers (Hossein Ipakchi, Masoud Esfandeh, Amir Masoud Rezadoust, Mohammad Rezaei)....Pages 493-496
Biological and Antibacterial Properties of Catechin-Incorporated PLA/Gelatin Hybrid Microfibers (Marziyeh Ranjbar Mohammadi, Mohammad Nouri-Taba, Ehsan Yousefi)....Pages 497-501
Janus Fiber Fabrication Using Electrospinning Process (Khadijeh Keshavarz Bahaghighat, Mohammad Hossein Navid Famili)....Pages 502-504
Front Matter ....Pages 505-505
Mechanical Properties of Poly(Lactic Acid)/Ethylene-Vinyl Acetate Copolymer/Nanoclay Composites as Biodegradable Packaging Films (Mahdieh Zaji, Masoud Frounchi)....Pages 507-510
Catalytic Degradation of Linear Low-Density Polyethylene Over USY Catalyst: Effect of Catalyst to Polymer Ratio (Mohammad Ghashghaee, Mohammad Reza Omidkhah, Samira Shirvani)....Pages 511-514
Effects of Black Content and Type on the Biodegradability of Natural Rubber (Somayyeh Mohammadian, Mohammad Barghamadi, Mehri Alimohammadi)....Pages 515-519
Recycling of Polyethylene Terephthalate (PET) via Glycolysis Method for Synthesis Waterborne Polyurethane (Mehran Dadash Ziyaei, Mehdi Barikani, Hengameh Honarkar)....Pages 520-523
Feasibility Study on Producing of Side-by-Side Bicomponent Filament Yarns Produced from Recycled and Fiber Grade PET (Marjan Abbasi, Richard Kotek)....Pages 524-527
Effect of Chemical Composition of Vinyl Acetate/Dibutyl Maleat Copolymers on the Permeation Properties of Blend Membranes Based on Poly(Ethylene Oxide-B-Amide6) Block Copolymer for Carbon Dioxide Separation (Marzieh Shirinia, Mahdi Abdollahi, Mohammadreza Omidkhaha)....Pages 528-532
Synthesis of Pyrolytic Carbon from Polyethylene Terephthalate on Graphite Substrate (Mitra Oliaei, Mohammad Yousefi)....Pages 533-536
Front Matter ....Pages 537-537
Alkanolamine-Based Adduct as Latent Accelerator for Epoxy/Dicyandiamide: Statistical Approach to the Relationship Between Adduct Ingredients and Cure Characteristic of One-Pot System (Mohammadnabi Hesabi, Ali Salimi, Mohammad Hosain Beheshty)....Pages 539-542
Fixation of Carbon Dioxide Using Epoxy Resin: A Thermodynamics and Molecular Simulation Study (Mahtab Shabani, Seyed Tahmoures Keshavarz, Farhid Farahmandghavi, Mohammad Imani)....Pages 543-545
Preparation of Polyether Sulfone Ultrafiltration Membrane and Investigation of Factors Affecting Its Performance for Hospital Wastewater Treatment (Seyed Hasan Maghoul, Ali Niatouri)....Pages 546-549
Study on the Viscoelastic Behavior of Nitrile Rubber/Polyvinyl Chloride Compounds Modified with Different Levels of Nanolayered Silicate (Mohammad Barghamadi, Mohammad Karrabi, Mir Hamid Reza Ghoreishy, Somayyeh Mohammadian)....Pages 550-554
Temperature Dependency of the Payne Effect in NBR/PVC Blends (Mohammad Barghamadi, Mohammad Karrabi, Mir Hamid Reza Ghoreishy, Somayyeh Mohammadian)....Pages 555-559
Numerical Evaluation of Effective Properties of PZT-5A/Epoxy Smart Piezoelectric Composite (Sobhan Sharafkhani, Mehrdad Kokabi)....Pages 560-564
Prediction of a Typical Amorphous Shape Memory Polymer Behavior Considering Both Glassy and Rubbery Phases (Ghazaleh Alamdarnejad, Mehrdad Kokabi)....Pages 565-568
Preparation of PVDF Nanowire by Infiltration Method into Lumina Nanopores (Hosna Soleymani, Mohamad Mehdi Abolhasani, Mohamad Normohamadi, Mohsen Ashjari)....Pages 569-572
Comparison Study of Carbon Nanotube and Carbon Black Filled Polyamide6/Polyethylene as a Tissue Equivalent Material (Farah Khoylou, Azam Akhavan, Faranak Naimian)....Pages 573-576
Producing Porous Polyacrylonitrile Fibers Using Wet-Spinning Method for Making Carbon Fibers (Ehsan Samimi, Mohammad Mehdi Abolhasani, Shahram Arbab)....Pages 577-580
Shape Memory Behaviour of Waterborne Polyurethane-Based Aerogel (Mohsen Teymouri, Reza Akbari, Mehrdad Kokabi)....Pages 581-584
Surface Modification of Cellulose Nanocrystal Through Dendrimer with Amine End Groups (Ali Mianehro, Somaye Akbari, Atefeh Solouk, Seid Ali Ahmadi)....Pages 585-588
Effect of Surface Treatment on Polyethylene Separator’s Properties of Lithium-Ion Batteries (Mohammad Hadi Moghim, Ashkan Nahvi Bayani, Abdol Majid Ghasemi, Rahim Eqra)....Pages 589-592
Copolymerization of Styrene and 1-Hexene via Ziegler-Natta and Atom Transfer Radical Polymerization Methods (Mohammad Reza Rostami Darounkola, Naeimeh Bahri-Laleh, Mehdi Nekoomanesh-Haghighi, Sanaz Rahmatiyan)....Pages 593-596
A Multi-objective Optimization Strategy for Controlling the Structural Properties of Lightweight Mutiphasic PE/EVA Foams (Sirwan Ghavami, Mohammad-Hasan Khademi, Farkhondeh Hemmati, Ali Fazeli, Jamshid Mohammadi-Roshandeh)....Pages 597-601
Fabrication of Photonic Crystal Heterostructures Free of Interface Imperfection Based on Plasma Assisted Versatile Deposition (Zahra Sadat Azizi, Mohammad Mehdi Tehranchi, Saeed Pourmahdian)....Pages 602-605
Shape Memory Behavior of Polyacrylamide Hydrogel (Sonia Norouzi Esfahany, Ghazaleh Alamdarnejad, Mehrdad Kokabi)....Pages 606-608
Determination of Entangled Supramolecular Polymer Networks Dynamics by High-Order Associations of Strong Hydrogen Bonding Groups (Amir Jangizehi, Seyed Reza Ghaffarian, Mostafa Ahmadi)....Pages 609-612
Investigating the Physico-Mechanical Properties of Elastomers Based on EPDM/Kevlar/Silica: Effect of Cork Filler and Curing Condition (Tohid Farajpour, Mohamad Javad Babaei-Velin, Hadi Rezaei-Vahidian, Ghodratoallah Mohammadzamani, Saeed Moradi)....Pages 613-616
Effect of Peroxides Mixtures on the Molecular Structure of Ethylene-1-Octene Copolymer in Reactive Blending (Mahdi Mahmoodabadi, Shervin Ahmadi, Hossein Ali Khonakdar)....Pages 617-620
Effect of Nanographene on the Curing Behavior and Rheological Properties of NBR/Phenolic Compounds (Sara Shafiee, Mohammad Karrabi, Mir Hamid Reza Ghoreishy)....Pages 621-624
Encapsulation of Epoxy Resin Within Nanocapsules via Facile and Cost Efficient Electrospray Method (Alireza Safdari, Saied Nouri Khorasani, Rasoul Esmaeely Neisiany)....Pages 625-628
Solvathochromism Effect of a New Synthesized Conjugated Organic Compound in Different Environments and Types of Polymers (Fateme Miri, Saeideh Gorji Kandi, Farhad Panahi)....Pages 629-632
MWCNT/PDMS Mixed Matrix Membrane for Oxygen Enriched Air Production (Mohammad Fazel Hasanzade, Fereidoon Mohammadi, Seyed Ali Ghadimi, Maryam Jalaei)....Pages 633-636
Modeling of Shape Memory Behavior of Semi-crystalline Polymer Considering Both Amorphous and Crystalline Phases (Reza Akbari, Mehrdad Kokabi)....Pages 637-640
Synthesis and Characterization of Linseed Oil Microcapsules with Poly(Melamine-Urea-Formaldehyde) Shell (Ashkan Karami, Atiyeh Adelinia)....Pages 641-643
Bio-Based Self-healing Thermoset Polyurethane Based on Pseudo-Tannin (Adel Soleimani, Mobina Khakbaz, Negar Tavakoli, Gity Mirmohamad Sadeghi)....Pages 644-647
Effect of Chain Extender on the Properties of Polysulfone-Based Membrane as a Candidate for Fuel Cell Proton Exchange Membrane (Maryam Mohammadi, Maryam Oroujzadeh, Shahram Mehdipour-Ataei)....Pages 648-651
A Novel Polysulfone-Based Proton Exchange Membrane: From Polymer Synthesis to Membrane Preparation, MEA Fabrication, and Fuel Cell Performance (Maryam Mohammadi, Maryam Oroujzadeh, Shahram Mehdipour-Ataei)....Pages 652-655
Microencapsulation of 2-Ethylhexyl Acrylate with Potential Application in Thread Locking Adhesives (Elahe Adibzade, Seyed Mojtaba Mirabedini, Morteza Behzadnasab)....Pages 656-659
Front Matter ....Pages 661-661
Synthesis, Characterization and Thermal Stability of UV-Curable Hydrogel (Zahra Rahmani, Saeed Pourmahdian, Behzad Shirkavand Hadavand)....Pages 663-666
Effect of Polyolefin Addition on the Heat Seal Strength of HDPE Blown Films (Ayat Mehdipour, Hossein Abedini, Majid Habibelahi, Morteza Ehsani)....Pages 667-672
Preparation of Novel Liquid, Solvent-Free, Polyalfaolefin-Based Adhesives (Ahad Hanifpour, Naeimeh Bahri-Laleh, Mehdi Nekoomanesh-Haghighi)....Pages 673-676
Evaluation of the Mechanical Properties of Poly(Lactic) Acid/ABS Bio-Blend Foams (Miguel Sánchez-Soto, Mohammad Reza Kamrani, Maria Lluisa Maspoch, Orlando Santana, Jonathan Cailloux)....Pages 677-681
PET/PLA Blends Crystallization Kinetics (Hasan Azizi Topkanlo, Zahed Ahamadi, Faramarz Afshar Taromi)....Pages 682-685
Microstructure and Mechanical Properties of Compatibilized Polylactide/Thermoplastic Starch Blends (Seyed Ali Nezamzadeh, Zahed Ahamadi, Faramarz Afshar Taromi)....Pages 686-689
Solvent Effect in 1-Decene Oligomerization Using Silica Supported AlCl3 Catalyst (Sevda Dehghani, Mehdi Nekoomanesh-Haghighi, Samahe Sadjadi, Naeimeh Bahri-Laleh)....Pages 690-693
Predicting Droplet Size by Rheometry Analysis for PBAT/EVOH Blend (Mehdi Elhamnia, Ghodratollah Hashemi Motlagh)....Pages 694-697
Back Matter ....Pages 699-733

Polecaj historie